⚾xFIP Calculator
Podrobný průvodce již brzy
Pracujeme na komplexním vzdělávacím průvodci pro xFIP Calculator. Brzy se vraťte pro podrobné vysvětlení, vzorce, příklady z praxe a odborné tipy.
Expected Fielding Independent Pitching (xFIP) builds on FIP's foundation by addressing one of FIP's remaining blind spots: home run rate volatility. While FIP correctly removes defense from the equation, it still rewards or punishes pitchers for whether their fly balls happened to leave the park — and year-to-year HR/FB (home run per fly ball) rates fluctuate considerably due to factors largely outside a pitcher's control, including wind, humidity, opposing lineup composition, and frankly, randomness. xFIP was developed by Dave Studeman at The Hardball Times and popularized through FanGraphs. Instead of using actual home runs allowed, xFIP replaces them with expected home runs based on the pitcher's fly ball rate multiplied by the league-average HR/FB percentage (typically around 10–12%). This single substitution removes another layer of noise and makes xFIP a slightly better predictor of future ERA than FIP itself. The practical implications are significant. A pitcher who allowed 35 home runs on a 15% HR/FB rate — well above the typical 10–11% — will have a much lower xFIP than FIP, signaling that regression toward the mean is likely. Max Scherzer, for instance, has repeatedly shown xFIP tracking closely to his ERA across seasons precisely because he maintains an elite strikeout rate and consistent fly ball tendencies without extreme HR/FB fluctuations. xFIP is particularly valuable in the first half of a season when actual home run totals are small and susceptible to noise. A reliever who has given up 6 home runs in 30 innings on a 25% HR/FB rate almost certainly has bad luck baked into his HR total — xFIP will expose this dramatically. Conversely, a pitcher with a sparkling ERA achieved partly through a 6% HR/FB rate may be in for a rough second half. Front offices and analytics departments typically run FIP, xFIP, and SIERA as a bundle. When all three cluster together, confidence in the pitcher's true quality is high. When they diverge sharply, it signals an area for deeper investigation — including Statcast data on exit velocity, barrel rate, and expected batting average against. Limitations include the assumption that all fly balls carry equal home run potential, ignoring launch angle clustering, park factors, and the legitimate skill some pitchers have in inducing weaker fly balls.
xFIP = ((13 × xHR) + (3 × (BB + HBP)) - (2 × K)) / IP + FIP Constant
Where:
- xHR = Expected HR = Fly Balls × League-Average HR/FB Rate (typically ~10.5%)
- BB = Walks
- HBP = Hit batters
- K = Strikeouts
- IP = Innings pitched
- FIP Constant = Same seasonal constant used in FIP (e.g., 3.17)
Worked Example:
Pitcher has: K=160, BB=40, HBP=4, FB=180, IP=170, League HR/FB=10.5%, Constant=3.17
xHR = 180 × 0.105 = 18.9
xFIP = ((13×18.9) + (3×(40+4)) - (2×160)) / 170 + 3.17
= (245.7 + 132 - 320) / 170 + 3.17
= 57.7 / 170 + 3.17
= 0.339 + 3.17
= 3.51 xFIP- 1Gather the pitcher's fly ball total (FB), strikeouts (K), walks (BB), hit batters (HBP), and innings pitched (IP) from FanGraphs or Baseball Savant.
- 2Look up the current season's league-average HR per fly ball rate (HR/FB%) — FanGraphs publishes this annually, and it typically falls between 9% and 13% depending on the run environment.
- 3Calculate expected home runs (xHR) by multiplying the pitcher's actual fly ball count by the league HR/FB rate — this replaces their actual home runs with what an average pitcher would allow given the same fly ball volume.
- 4Apply the standard FIP formula using xHR instead of actual HR: multiply xHR by 13, add 3 times (BB + HBP), subtract 2 times K, then divide by IP.
- 5Add the FIP constant to put the result on the ERA scale, making it directly comparable across seasons and pitchers.
- 6Compare xFIP to actual FIP — a large gap (FIP much lower than xFIP) suggests the pitcher is beating their expected home run rate and may regress upward.
The pitcher's actual 15 HRs look great, but 220 fly balls with a 10.5% league rate implies ~23 expected HRs. xFIP reveals significant positive regression risk.
Scherzer's elite K rate dominates the formula. With a fly ball count that closely matches expected HRs, his FIP and xFIP track tightly, confirming genuine ace-level quality.
Fewer fly balls mean fewer expected HRs. A sinker-heavy pitcher with a poor actual HR rate relative to fly balls will see xFIP and FIP align more closely than a high-fly-ball arm.
12 HRs on 55 fly balls is a 21.8% HR/FB — absurdly high. xFIP corrects this to 5.8 expected HRs, showing the reliever is far better than his bloated ERA and FIP suggest.
Pitching analytics departments use xFIP alongside SIERA to set realistic performance targets for starters in contract extension negotiations, filtering out years distorted by extreme HR/FB luck., representing an important application area for the Xfip Calculator in professional and analytical contexts where accurate xfip ulator calculations directly support informed decision-making, strategic planning, and performance optimization
DFS (daily fantasy sports) players use xFIP to identify starting pitchers likely to outperform their recent ERA — a pitcher with a 4.50 ERA and a 3.25 xFIP is underpriced on FanDuel and DraftKings.
Trade deadline analysts compare a pitcher's FIP and xFIP over two seasons to determine whether a down year reflects real decline or correctable noise, influencing prospect price in trade packages.
Player development coaches use xFIP to evaluate whether a minor league prospect's fly ball tendencies are concerning or manageable, given the expected HR environment at the MLB level., representing an important application area for the Xfip Calculator in professional and analytical contexts where accurate xfip ulator calculations directly support informed decision-making, strategic planning, and performance optimization
Extremely large or small input values in the Xfip Calculator may push xfip
Extremely large or small input values in the Xfip Calculator may push xfip ulator calculations beyond typical operating ranges. While mathematically valid, results from extreme inputs may not reflect realistic xfip ulator scenarios and should be interpreted cautiously. In professional xfip ulator settings, extreme values often indicate measurement errors, unusual conditions, or edge cases meriting additional analysis. Use sensitivity analysis to understand how results change across plausible input ranges rather than relying on single extreme-case calculations.
In seasons where the league HR/FB rate shifts dramatically (as it did during
In seasons where the league HR/FB rate shifts dramatically (as it did during the 2019 'juiced ball' era, where rates spiked to ~14%), using an outdated league HR/FB constant will produce systematically biased xFIP values.. In the Xfip Calculator, this scenario requires additional caution when interpreting xfip ulator results. The standard formula may not fully account for all factors present in this edge case, and supplementary analysis or expert consultation may be warranted. Professional best practice involves documenting assumptions, running sensitivity analyses, and cross-referencing results with alternative methods when xfip ulator calculations fall into non-standard territory.
Extremely large or small input values in the Xfip Calculator may push xfip
Extremely large or small input values in the Xfip Calculator may push xfip ulator calculations beyond typical operating ranges. While mathematically valid, results from extreme inputs may not reflect realistic xfip ulator scenarios and should be interpreted cautiously. In professional xfip ulator settings, extreme values often indicate measurement errors, unusual conditions, or edge cases meriting additional analysis. Use sensitivity analysis to understand how results change across plausible input ranges rather than relying on single extreme-case calculations.
| xFIP Range | Grade | League Percentile | Typical Role |
|---|---|---|---|
| < 3.00 | Elite | 95th+ | Cy Young contender, ace |
| 3.00 – 3.50 | Plus | 80th–95th | Top-of-rotation starter |
| 3.50 – 4.00 | Above Average | 60th–80th | Mid-rotation, quality reliever |
| 4.00 – 4.50 | Average | 40th–60th | Back-end starter, setup man |
| 4.50 – 5.25 | Below Average | 20th–40th | Spot starter, long relief |
| > 5.25 | Poor | < 20th | Replacement level |
What is xFIP and how is it different from FIP?
xFIP replaces actual home runs with expected home runs based on fly ball rate and league-average HR/FB percentage. This removes year-to-year variance in home run rates, making xFIP a marginally better predictor of future ERA than FIP in most research studies. This is particularly important in the context of xfip calculatorulator calculations, where accuracy directly impacts decision-making. Professionals across multiple industries rely on precise xfip calculatorulator computations to validate assumptions, optimize processes, and ensure compliance with applicable standards. Understanding the underlying methodology helps users interpret results correctly and identify when additional analysis may be warranted.
Which is a better predictor — FIP or xFIP?
Research consistently shows xFIP predicts future ERA slightly better than FIP because it normalizes the most volatile component (HR/FB rate). However, the difference is small, and for pitchers with multi-year track records, FIP may capture genuine HR-suppression skill that xFIP obscures. This is particularly important in the context of xfip calculatorulator calculations, where accuracy directly impacts decision-making. Professionals across multiple industries rely on precise xfip calculatorulator computations to validate assumptions, optimize processes, and ensure compliance with applicable standards. Understanding the underlying methodology helps users interpret results correctly and identify when additional analysis may be warranted.
What is a good xFIP for a starting pitcher?
Elite starters post xFIPs below 3.25, above-average starters fall in the 3.25–3.75 range, and league average is typically around 4.00. Values above 4.50 indicate a back-end rotation arm or replacement-level talent. This is particularly important in the context of xfip calculatorulator calculations, where accuracy directly impacts decision-making. Professionals across multiple industries rely on precise xfip calculatorulator computations to validate assumptions, optimize processes, and ensure compliance with applicable standards. Understanding the underlying methodology helps users interpret results correctly and identify when additional analysis may be warranted.
Can a pitcher legitimately have a lower HR/FB rate than league average?
Yes, though it is relatively rare and often overstated. Some pitchers with exceptional backspin control or who induce consistently weak fly ball contact can sustain below-average HR/FB rates. However, most research suggests individual HR/FB rates regress toward the mean over 2–3 seasons. This is particularly important in the context of xfip calculatorulator calculations, where accuracy directly impacts decision-making. Professionals across multiple industries rely on precise xfip calculatorulator computations to validate assumptions, optimize processes, and ensure compliance with applicable standards. Understanding the underlying methodology helps users interpret results correctly and identify when additional analysis may be warranted.
Does xFIP account for park factors?
Standard xFIP does not include park adjustments, but park-adjusted versions (like those available on FanGraphs) do normalize for stadium effects. Pitchers at Coors Field or Yankee Stadium should always be evaluated with park-adjusted metrics. This is particularly important in the context of xfip calculatorulator calculations, where accuracy directly impacts decision-making. Professionals across multiple industries rely on precise xfip calculatorulator computations to validate assumptions, optimize processes, and ensure compliance with applicable standards. Understanding the underlying methodology helps users interpret results correctly and identify when additional analysis may be warranted.
Why does xFIP sometimes diverge significantly from ERA?
ERA includes luck on balls in play (BABIP), strand rate (LOB%), and actual home run luck, while xFIP removes all three of these. Large ERA-xFIP gaps almost always reflect unsustainable fortune — positive or negative. This is particularly important in the context of xfip calculatorulator calculations, where accuracy directly impacts decision-making. Professionals across multiple industries rely on precise xfip calculatorulator computations to validate assumptions, optimize processes, and ensure compliance with applicable standards. Understanding the underlying methodology helps users interpret results correctly and identify when additional analysis may be warranted.
Is xFIP useful in evaluating relievers?
Absolutely — xFIP is arguably more valuable for relievers than starters because small sample sizes make actual HR totals extremely noisy in 50–70 inning stints. A reliever with 3 HRs in 40 innings on a 20% HR/FB rate has a very misleading FIP that xFIP corrects. This is particularly important in the context of xfip calculatorulator calculations, where accuracy directly impacts decision-making. Professionals across multiple industries rely on precise xfip calculatorulator computations to validate assumptions, optimize processes, and ensure compliance with applicable standards. Understanding the underlying methodology helps users interpret results correctly and identify when additional analysis may be warranted.
Pro Tip
Use xFIP as your primary mid-season regression predictor. When a pitcher's xFIP is more than 0.75 runs higher than their ERA, consider them a regression risk. When xFIP is more than 0.75 runs lower than ERA, they're a potential breakout or buy-low target — especially if their BABIP is also elevated.
Did you know?
During the 2019 'juiced ball' season, the league-wide HR/FB rate shot to approximately 14.8%, the highest ever recorded. Pitchers who were unlucky enough to face that environment saw their FIPs crater relative to xFIP, creating one of the widest seasonal FIP vs. xFIP divergences in the Statcast era.