Detaljeret guide kommer snart
Vi arbejder på en omfattende uddannelsesguide til Vacancy Rate Lommeregner. Kom snart tilbage for trin-for-trin forklaringer, formler, eksempler fra virkeligheden og eksperttips.
Vacancy rate is a fundamental real estate metric that measures the percentage of available rental units or space that is unoccupied at any given time. It is the inverse of the occupancy rate — a 7% vacancy rate means 93% of units are rented. Vacancy rate directly impacts a property's Net Operating Income (NOI) and, through the cap rate relationship, its overall market value. Every percentage point of vacancy represents lost rental income, and that loss is amplified in property valuation. Vacancy occurs for several reasons: tenant turnover (time between one tenant leaving and another arriving), economic vacancy (units occupied but tenant not paying), seasonal demand fluctuations, poor marketing or management, property condition issues, or overpricing relative to the market. Understanding why vacancy exists is as important as measuring it — the appropriate remedy differs for each cause. There are two important distinctions in vacancy measurement. Physical vacancy counts the actual number of unoccupied units as a percentage of total units. Economic vacancy is broader: it includes both physically vacant units and units occupied by non-paying or significantly delinquent tenants, plus concessions (free rent, discounts) given to attract tenants. Economic vacancy is always higher than physical vacancy and represents the true income loss. Market vacancy rates are closely watched by real estate investors, developers, and lenders as indicators of supply-demand balance. In tight markets (vacancy below 4–5%), landlords have pricing power and rents rise. In loose markets (vacancy above 8–10%), tenants have leverage, rents stagnate or fall, and landlords must offer concessions. Developers use market vacancy to time new construction — low vacancy signals undersupply and supports new development feasibility. High vacancy warns of oversupply and can make new projects infeasible.
Physical Vacancy Rate = (Vacant Units / Total Units) × 100% Economic Vacancy Rate = (Lost Revenue from Vacancy + Concessions) / Gross Potential Income × 100% Occupancy Rate = 100% − Vacancy Rate
- 1Count the total number of rentable units in the property (or total rentable square footage for commercial properties).
- 2Count the vacant (unoccupied) units at the measurement date. For a more accurate picture, track vacancy over time and compute an average vacancy rate for the trailing 12 months.
- 3Compute physical vacancy rate: Vacant Units / Total Units × 100.
- 4For economic vacancy, add concessions and non-paying tenant income losses to the numerator: Economic VR = (Vacant Unit Rent + Concessions + Bad Debt) / GPI × 100.
- 5Compare your vacancy rate to market vacancy rates for comparable properties in the same submarket to assess whether you are above or below market performance.
- 6Investigate root causes of above-market vacancy: pricing, property condition, management quality, location, or macroeconomic factors — each requires a different response.
Vacancy Rate = 2/20 = 10%. Annual income loss = 2 units × $1,200 × 12 months = $28,800 in foregone rent. At a 6% cap rate, this vacancy translates to approximately $480,000 in lost property value ($28,800 / 0.06). Filling even one of those units would add $14,400 in annual NOI and approximately $240,000 in property value.
Vacancy Rate = 8,500 / 50,000 = 17%. Income loss = 8,500 SF × $28 = $238,000/year. At a 7% cap rate, this vacancy depresses value by $3.4M. The 17% vacancy exceeds the market average of 12% for this submarket, suggesting the building may be priced above market, have condition issues, or suffer from poor marketing.
Physical vacancy income loss = 5% × $200,000 = $10,000. Economic vacancy = ($10,000 + $6,000 + $4,000) / $200,000 = 10%. Wait, $20,000 / $200,000 = 10%. The economic vacancy (10%) is double the physical vacancy (5%) because concessions and bad debt add significant hidden income losses. This distinction is critical for accurate NOI calculation.
The property's 8% vacancy is 4 percentage points above the market average. Excess income loss = 4% × $180,000 = $7,200/year. At a 6% cap rate, this excess vacancy reduces value by $7,200 / 0.06 = $120,000. The management team needs to investigate why vacancy exceeds market — is it pricing, maintenance, marketing, or tenant quality issues?
Vacant units = 300 − 255 = 45. Vacancy Rate = 45/300 = 15%. Monthly revenue loss = 45 × $85 = $3,825, or $45,900 annually. For self-storage, stabilized vacancy is typically 8–12% — this portfolio at 15% is underperforming. Improving to 90% occupancy (10% vacancy) would add $4,250/month or $51,000/year in revenue.
NOI calculation: vacancy rate determines the vacancy allowance deducted from Gross Potential Income, representing an important application area for the Vacancy Rate Calc in professional and analytical contexts where accurate vacancy rate calculations directly support informed decision-making, strategic planning, and performance optimization
Property valuation: vacancy directly affects NOI and therefore cap-rate-based value, representing an important application area for the Vacancy Rate Calc in professional and analytical contexts where accurate vacancy rate calculations directly support informed decision-making, strategic planning, and performance optimization
Market analysis: tracking vacancy trends to time acquisitions and dispositions, representing an important application area for the Vacancy Rate Calc in professional and analytical contexts where accurate vacancy rate calculations directly support informed decision-making, strategic planning, and performance optimization
Lender underwriting: DSCR calculation uses market vacancy assumption, representing an important application area for the Vacancy Rate Calc in professional and analytical contexts where accurate vacancy rate calculations directly support informed decision-making, strategic planning, and performance optimization
Development feasibility: market vacancy below 5% signals absorption strength for new supply, representing an important application area for the Vacancy Rate Calc in professional and analytical contexts where accurate vacancy rate calculations directly support informed decision-making, strategic planning, and performance optimization
Lease-up period: Newly constructed or heavily renovated properties will have high vacancy initially.
Model their vacancy as declining to stabilized levels over 12–24 months, and underwrite based on the stabilized state.. In the Vacancy Rate Calc, this scenario requires additional caution when interpreting vacancy rate results. The standard formula may not fully account for all factors present in this edge case, and supplementary analysis or expert consultation may be warranted. Professional best practice involves documenting assumptions, running sensitivity analyses, and cross-referencing results with alternative methods when vacancy rate calculations fall into non-standard territory.
Extremely large or small input values in the Vacancy Rate Calc may push vacancy
Extremely large or small input values in the Vacancy Rate Calc may push vacancy rate calculations beyond typical operating ranges. While mathematically valid, results from extreme inputs may not reflect realistic vacancy rate scenarios and should be interpreted cautiously. In professional vacancy rate settings, extreme values often indicate measurement errors, unusual conditions, or edge cases meriting additional analysis. Use sensitivity analysis to understand how results change across plausible input ranges rather than relying on single extreme-case calculations.
Extremely large or small input values in the Vacancy Rate Calc may push vacancy
Extremely large or small input values in the Vacancy Rate Calc may push vacancy rate calculations beyond typical operating ranges. While mathematically valid, results from extreme inputs may not reflect realistic vacancy rate scenarios and should be interpreted cautiously. In professional vacancy rate settings, extreme values often indicate measurement errors, unusual conditions, or edge cases meriting additional analysis. Use sensitivity analysis to understand how results change across plausible input ranges rather than relying on single extreme-case calculations.
COVID-era distortions: Retail and office vacancy rates were severely distorted
COVID-era distortions: Retail and office vacancy rates were severely distorted by the pandemic and may not represent long-term market norms. Analyze pre-pandemic and post-pandemic trends separately.. In the Vacancy Rate Calc, this scenario requires additional caution when interpreting vacancy rate results. The standard formula may not fully account for all factors present in this edge case, and supplementary analysis or expert consultation may be warranted. Professional best practice involves documenting assumptions, running sensitivity analyses, and cross-referencing results with alternative methods when vacancy rate calculations fall into non-standard territory.
| Property Type | Healthy Vacancy Range | Distressed Vacancy Level |
|---|---|---|
| Class A Apartments (Urban) | 2–5% | >10% |
| Class B/C Apartments (Suburban) | 4–8% | >15% |
| Office (CBD) | 8–15% | >25% |
| Office (Suburban) | 10–20% | >30% |
| Retail (Strip Mall) | 5–10% | >20% |
| Industrial / Warehouse | 3–6% | >12% |
| Self-Storage | 8–12% | >20% |
| Single-Family Rental | 2–5% | >10% |
What is a normal vacancy rate for residential properties?
For stabilized residential properties (apartments, multifamily), a healthy market vacancy rate is typically 4–7%. Vacancy below 3% indicates a very tight rental market where landlords have significant pricing power. Vacancy above 10% suggests a soft market, oversupply, or property-specific issues. These benchmarks vary by metro area — NYC and San Francisco often run 2–4%, while some Sun Belt markets run 8–12% during construction booms.
How does vacancy rate affect NOI and property value?
Vacancy rate directly reduces effective gross income, which flows straight through to NOI reduction. The impact is then amplified through the cap rate: a $10,000 reduction in NOI reduces property value by $10,000 / Cap Rate. At a 6% cap rate, that's a $167,000 value reduction per $10,000 of NOI lost to vacancy. This is why even small improvements in occupancy have outsized effects on property value.
What is the difference between physical and economic vacancy?
Physical vacancy counts units that are literally empty and unoccupied. Economic vacancy is broader — it includes physically vacant units plus the income lost from tenants who are occupying units but not paying rent (delinquency), plus any rent concessions offered to attract tenants (free months, reduced rates). Economic vacancy is always at least as high as physical vacancy and is the better measure of true income loss.
How do I reduce vacancy in a rental property?
Reducing vacancy requires diagnosing the root cause. If pricing is the issue, adjust rents toward market rates. If condition is the problem, invest in deferred maintenance and cosmetic upgrades. Improve marketing through professional photos, online listings, and fast inquiry response. Pre-lease units before they become vacant by contacting tenants 60–90 days before lease expiration. Offer incentives like small rent discounts for longer-term leases to reduce turnover frequency.
How do lenders view vacancy rates?
Lenders use a stabilized vacancy assumption (usually the market average, not the actual property vacancy) when underwriting loans. They calculate Debt Service Coverage Ratio (DSCR) based on NOI with market-rate vacancy applied. If a property is currently over-occupied (below market vacancy), lenders will haircut the income to market. If a property has elevated vacancy, lenders may require an occupancy lease-up period before funding or charge a higher interest rate to compensate for the risk.
What is a 'stabilized' vacancy rate?
A stabilized vacancy rate is the long-term sustainable vacancy rate for a property once initial lease-up or repositioning is complete and the property is operating at normal market conditions. Lenders and appraisers use stabilized vacancy (rather than current actual vacancy) when valuing or underwriting properties. For a newly constructed building still leasing up, the stabilized vacancy might be 5% even if current physical vacancy is 40%.
How does the local economy affect vacancy rates?
Vacancy rates are highly sensitive to economic conditions. Job growth drives household formation and rental demand, reducing vacancy. Job losses or business closures cause tenants to double up, move away, or default — raising vacancy. Specific drivers include: tech sector growth drives apartment demand in tech hubs, university presence stabilizes student housing vacancy, and manufacturing plant closures can devastate local retail and residential vacancy for years.
Should I include model units or manager units in my vacancy calculation?
Model units (held off the market to show to prospective tenants) and manager-occupied units represent real units that are not generating rental income. They should be included in total unit count and treated as occupied for operational purposes — but their economic impact should be reflected in the NOI underwriting. Most appraisers exclude permanently manager-occupied units from rentable unit counts but include them in the expense structure.
Pro Tip
When underwriting a property acquisition, always use market vacancy (not current vacancy) in your NOI and value calculations. If the property is currently above market occupancy, your lender will anyway — and you need to stress-test whether the investment still makes sense at normalized market vacancy levels.
Vidste du?
The US office market hit a historic vacancy rate of approximately 19–20% in 2023–2024, the highest since the savings-and-loan crisis of the early 1990s. Remote work adoption permanently shifted demand patterns, leaving billions of square feet of office space structurally underutilized in major cities.