learn.howToCalculate
learn.whatIsHeading
Pipe sizing selects appropriate diameter to convey water at acceptable velocity and pressure drop. Too small causes excessive friction; too large wastes material.
Trin-for-trin guide
- 1Apply Hazen-Williams or Darcy-Weisbach equations
- 2Velocity typically 0.6-2.4 m/s for water systems
- 3Calculate diameter and pressure drop
Løste eksempler
Input
Q = 0.05 m³/s water flow, C = 150 (PVC), L = 100 m
Resultat
D ≈ 50-63 mm for <1 m/100 m drop
Hazen-Williams estimate
Almindelige fejl at undgå
- ✕Using smooth pipe assumptions on old systems
- ✕Neglecting temperature effects on viscosity
Ofte stillede spørgsmål
Why limit velocity?
Too high velocity causes excessive friction loss and noise; too low allows settling and corrosion.
How does pipe age affect sizing?
Roughness increases with age, increasing friction losses. Design for aged conditions.
Klar til at beregne? Prøv den gratis Pipe Sizing-beregner
Prøv det selv →