So berechnen Sie Beam Deflection
learn.whatIsHeading
Beam deflection calculates downward displacement under loading. Engineers use this to ensure beams don't sag excessively and meet serviceability requirements.
Formel
The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
Schritt-für-Schritt-Anleitung
- 1Input beam type (cantilever, simply supported, etc.), load type, material properties, and geometry
- 2The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
- 3Results show maximum deflection and compliance with limits
Gelöste Beispiele
Eingabe
Cantilever, P=10 kN, L=3 m, EI=200 kN·m²
Ergebnis
δ ≈ 45 mm
At L/4 deflection check
Häufige Fehler vermeiden
- ✕Using beam formula for wrong support conditions
- ✕Neglecting distributed loads when present
Häufig gestellte Fragen
Why limit beam deflection?
Excessive deflection causes floor sag, cracks, misalignment. Building codes limit deflection to L/240-L/360.
How does moment of inertia affect deflection?
Doubling I reduces deflection by half; this is why tall I-beams resist deflection better than wide ones.
Bereit zur Berechnung? Probieren Sie den kostenlosen Beam Deflection-Rechner aus
Probieren Sie es selbst aus →