So berechnen Sie Screw Thread Converter
learn.whatIsHeading
Screw thread converters translate between different thread designations: UNC, UNF, metric (M), BSW, etc.
Formel
Inch: #10-24 UNC = 10 size, 24 threads/inch
- UNC
- 10 size — 10 size
Schritt-für-Schritt-Anleitung
- 1Metric: M10 = 10 mm diameter, coarse (1.5 mm pitch) or fine (1.25 mm)
- 2Inch: #10-24 UNC = 10 size, 24 threads/inch
- 3Non-interchangeable between systems (need washers, adapters)
Gelöste Beispiele
Eingabe
M8 metric thread
Ergebnis
8 mm diameter, UNC equivalent #5-40, similar size
Not exactly interchangeable
Häufige Fehler vermeiden
- ✕Assuming metric and inch are compatible (they're not)
- ✕Not checking thread pitch (critical for alignment)
Häufig gestellte Fragen
Can metric and inch threads be used interchangeably?
No, slightly different pitch and angle. Using wrong thread can damage equipment.
What's the difference between coarse and fine pitch?
Fine pitch holds tighter, suits thin walls, vibration-resistant. Coarse easier to assemble, stronger.
Bereit zur Berechnung? Probieren Sie den kostenlosen Screw Thread Converter-Rechner aus
Probieren Sie es selbst aus →