So berechnen Sie Surface Roughness
learn.whatIsHeading
Surface roughness affects friction, wear, fatigue, and appearance. Proper specification prevents unnecessary cost or inadequate performance.
Schritt-für-Schritt-Anleitung
- 1Measure Ra (average roughness) in micrometers or microinches
- 2Typical values: rough (3.2-6.3 μm), normal (0.8-1.6 μm), smooth (0.05-0.2 μm)
- 3Specify based on functional requirements
Gelöste Beispiele
Eingabe
Bearing surface typically requires Ra <0.4 μm (smooth)
Ergebnis
Specify fine grinding or lapping
Affects bearing life
Häufige Fehler vermeiden
- ✕Over-specifying finish (unnecessary cost)
- ✕Under-specifying and causing functional problems
Häufig gestellte Fragen
Why does roughness matter for bearings?
Rough surfaces cause higher friction and wear. Smooth surfaces reduce wear 10-100×.
Does fine surface finish improve fatigue strength?
Yes, polished surfaces have ~50% higher fatigue strength than rough surfaces.
Bereit zur Berechnung? Probieren Sie den kostenlosen Surface Roughness-Rechner aus
Probieren Sie es selbst aus →