詳細ガイド 近日公開
Footing Size Calculatorの包括的な教育ガイドを準備中です。ステップバイステップの解説、数式、実例、専門家のヒントをお届けしますので、もうしばらくお待ちください。
A footing size calculator determines the required dimensions of a concrete foundation element that spreads a structural load over enough soil area to stay within the soil's bearing capacity. Footings are the interface between the structure above and the earth below — if a footing is too small, it sinks (settles) or punches through the soil; too large, it wastes concrete and costs more. The basic bearing pressure equation is: q = P / A, where q is the soil bearing pressure (PSF or ksf), P is the total applied load (lb or kips), and A is the footing area (ft²). The required footing area is: A_req = P / q_allowable. The allowable bearing capacity q_allowable depends on soil type, depth of footing, and foundation width—from 1,000 PSF for soft soil to 4,000+ PSF for dense gravel or shallow bedrock. For a square footing: Side = √(P / q_allow). For a rectangular footing: L × W = P / q_allow with L/W ratio chosen to fit the column or wall spacing. Wall (continuous strip) footings have area expressed per linear foot: w_footing = P_linear / q_allow. Footing depth must be below the frost line—the depth to which soil freezes in winter. Frost heave from freezing water expands soil and can lift or crack a shallow footing. IBC requires footings to extend below the frost depth established by local codes. Frost depths range from 6 inches in southern climates to 60+ inches in northern states and Canada. ACI 318 governs concrete footing design. Footings must be checked for: (1) soil bearing pressure, (2) one-way (beam) shear at d distance from column face, (3) two-way (punching) shear at d/2 from column face, and (4) bending moment at the column face. Minimum footing thickness is 6 inches for unreinforced and 8 inches for reinforced per code. Soil bearing capacity must be confirmed by a geotechnical engineer from borings or load tests on important projects. Presumptive values in IBC Table 1806.2 can be used for light structures in non-critical applications.
A_footing = P_total / q_allowable Side (square) = √(P / q_allow) Where each variable represents a specific measurable quantity in the engineering and electrical domain. Substitute known values and solve for the unknown. For multi-step calculations, evaluate inner expressions first, then combine results using the standard order of operations.
- 1Gather the required input values: P, q_allow, A, B, L.
- 2Apply the core formula: A_footing = P_total / q_allowable Side (square) = √(P / q_allow).
- 3Compute intermediate values such as Strip footing width if applicable.
- 4Verify that all units are consistent before combining terms.
- 5Calculate the final result and review it for reasonableness.
- 6Check whether any special cases or boundary conditions apply to your inputs.
- 7Interpret the result in context and compare with reference values if available.
Electrical engineers in power distribution companies use Footing Size Calc to size conductors, calculate voltage drop across long cable runs, and verify that circuit breaker ratings provide adequate protection against fault currents in residential, commercial, and industrial installations.
Electronics design engineers apply Footing Size Calc during printed circuit board layout to determine trace widths for required current capacity, calculate impedance matching for high-speed signal traces, and verify thermal dissipation in surface-mount components under worst-case operating conditions.
Maintenance technicians in manufacturing plants use Footing Size Calc to troubleshoot motor control circuits, verify transformer tap settings, and calculate expected current draws when commissioning variable frequency drives and programmable logic controller systems.
Renewable energy system designers rely on Footing Size Calc to size solar panel arrays, calculate battery bank capacity for off-grid installations, and determine inverter ratings that match the expected peak and continuous load demands of residential and commercial photovoltaic systems.
Open circuit or infinite resistance
In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in footing size calculator calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.
Short circuit condition
In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in footing size calculator calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.
Reactive component dominance
In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in footing size calculator calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.
| Soil Type | Presumptive Bearing Capacity (PSF) | Settlement Risk |
|---|---|---|
| Crystalline bedrock | 12,000+ | Negligible |
| Sedimentary bedrock | 4,000–8,000 | Very low |
| Dense gravel/gravel-sand | 3,000–4,000 | Low |
| Loose gravel / dense sand | 2,000–3,000 | Low-moderate |
| Compact fine sand / stiff clay | 1,500–2,000 | Moderate |
| Medium clay | 1,000–1,500 | Moderate-high |
| Soft clay / loose sand | 500–1,000 | High |
| Very soft clay / organic | < 500 | Very high — use piles |
In the context of Footing Size Calc, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
In the context of Footing Size Calc, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
In the context of Footing Size Calc, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
In the context of Footing Size Calc, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
In the context of Footing Size Calc, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
In the context of Footing Size Calc, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
In the context of Footing Size Calc, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
プロのヒント
Always specify footings a standard size: width in 6-inch increments and thickness in 2-inch increments (8, 10, 12, 14 in). Non-standard sizes cost more in formwork and rebar detailing.
ご存知でしたか？
The Leaning Tower of Pisa began tilting within a decade of the start of construction in 1173 because its foundation rested on soft, unstable soil. Modern geotechnical engineering — which emerged only in the 1920s — would have predicted and prevented this famous structural mistake.