learn.howToCalculate
learn.whatIsHeading
Designs passive and active filters to remove unwanted frequencies. Critical for noise rejection, bandwidth limiting, and signal conditioning.
ステップバイステップガイド
- 1Define cutoff frequency (fc) and rolloff slope
- 2Choose filter type (low-pass, high-pass, band-pass, notch)
- 3Select topology (RC, active op-amp, higher-order)
- 4Calculate component values from transfer function
- 5Verify using simulation or measurement
解いた例
入力
fc=1kHz, 1st order RC
結果
C=0.16uF needed
避けるべきよくある間違い
- ✕Not accounting for component tolerances (change frequency)
- ✕Designing without considering impedance loading effects
よくある質問
What's the difference between -3dB and -20dB/decade rolloff?
-3dB frequency is cutoff; -20dB/decade is first-order rolloff; higher order = steeper slope.
Should I use passive or active filters?
Passive: simple, low-cost, no power; active: precise, adjustable, requires power, adds noise.
計算する準備はできましたか?無料の Filter Design 計算機をお試しください
自分で試してみる→