詳細ガイド 近日公開
Takt Time Calculatorの包括的な教育ガイドを準備中です。ステップバイステップの解説、数式、実例、専門家のヒントをお届けしますので、もうしばらくお待ちください。
Takt time is the rate at which a production system must produce one unit to exactly match customer demand — the heartbeat of a lean manufacturing system. Derived from the German word 'Takt' (beat, pulse), it was introduced to Toyota by German engineers in the 1930s and became a cornerstone of the Toyota Production System. Takt time answers the question: how often should we complete one unit to satisfy customers without over- or under-producing? The key insight of takt time is that it is demand-driven, not supply-driven. Takt time is calculated from customer order rate — not from what the machine can produce or what operators are capable of. It sets the production rhythm that all processes must synchronize to. If customer demand is 480 units per 8-hour shift, takt time is 60 seconds — one unit must exit the production system every 60 seconds. Every workstation is then designed to have a cycle time at or below 60 seconds. Takt time is the foundation of lean production system design. It drives workstation cycle time targets, crew size decisions, machine investment analysis, and buffer stock calculations. When takt time decreases (demand increases), you must either reduce cycle times or add resources. When takt time increases (demand decreases), you can reduce crew size through redeployment to match the slower required rate — preventing overproduction waste. The relationship between takt time and cycle time is critical to identify bottlenecks and production imbalances. Any operation with a cycle time exceeding takt time is a bottleneck that constrains the entire system's throughput. Line balancing — redistributing work to ensure every workstation's cycle time is at or below takt time — is one of the most impactful lean tools for maximizing output with existing resources.
Takt Time Formula: Takt Time = Net Available Production Time ÷ Customer Demand Net Available Production Time: = (Shift Length − Planned Breaks − Planned Maintenance) Example: 8 hr shift − 30 min breaks − 15 min maintenance = 435 min = 26,100 sec If demand is expressed as daily demand: TT = Daily Available Seconds ÷ Daily Customer Demand (units) Line Balance Efficiency: Line Efficiency = (Sum of All Workstation Cycle Times) ÷ (Number of Stations × Takt Time) × 100 Required Number of Operators: Operators Needed = Total Cycle Time Content ÷ Takt Time Worked Example: Shift: 480 min − 30 min breaks = 450 min = 27,000 sec Customer demand: 540 units per shift Takt time = 27,000 ÷ 540 = 50 seconds per unit
- 1Calculate Net Available Production Time — start with shift length and subtract all planned non-production time: scheduled breaks, planned maintenance windows, shift handover time, and any regulatory-mandated rest periods.
- 2Determine customer demand rate for the period — use the actual customer order rate (daily, weekly, or per-shift) rather than production targets or forecasts. If demand varies, use rolling average demand or model takt time for different demand scenarios.
- 3Divide Net Available Production Time by Customer Demand to get takt time in seconds per unit — this is the production heartbeat that all operations must match.
- 4Compare takt time to each workstation's cycle time — any station with cycle time exceeding takt time is a bottleneck. Stations with cycle time far below takt time have excess capacity that can absorb work from adjacent bottleneck stations.
- 5Calculate required operator headcount: divide the total labor content (sum of all operator cycle times) by takt time to find the theoretically minimum number of operators needed to meet demand.
- 6Design workstation assignments so that each operator's cycle time is at or below takt time — this may require moving work elements between stations, combining adjacent operations, or redesigning workstation layouts.
- 7Recalculate takt time whenever demand changes materially — takt time should be updated at minimum with each production planning cycle (weekly or monthly) and reflected in staffing and pace adjustments.
Toyota's Georgetown plant produces approximately 500,000 vehicles per year on multiple shifts, with takt times in the 55–70 second range per vehicle. Every workstation — from body welding to final inspection — is timed to this beat.
Station B cannot keep pace with customer demand. Two options: reduce Station B's cycle time below 45 sec (kaizen), or move 7 seconds of work from B to Station A or C, which both have capacity headroom.
With 360 seconds of total labor content and a 60-second takt time, 6 operators are theoretically sufficient. If 7 are deployed, either one operator is partially idle or the line is running slower than necessary — both are waste.
A 25% demand increase (400→500 units/shift) reduces takt time from 67.5 to 54 sec — all operations must now complete in under 54 sec. This analysis identifies which stations need kaizen investment before the volume increase arrives.
Toyota and other lean manufacturers use takt time as the primary input for production system design — every new model launch begins with a takt time calculation that drives all downstream workstation design, crew size planning, and equipment investment decisions.
Production planners use takt time calculations to determine crew size adjustments for different demand scenarios — when orders increase, takt time is recalculated and additional operators are deployed; when orders decrease, operators are redeployed to Kaizen activities rather than producing excess inventory.
Industrial engineers use takt time in line balancing studies to redistribute work between workstations, targeting a balanced design where every operator works at approximately the same pace with cycle times matching the takt time.
Lean consultants teach takt time as the first concept in value stream mapping training — it sets the production context (fast vs. slow pulse) that makes all downstream process observations meaningful.
Mixed-model production — producing different product variants on the same line
Mixed-model production — producing different product variants on the same line — requires a weighted average takt time based on the product mix. If Product A takes 1.5× the labor content of Product B, producing an equal mix means the effective takt time must account for this difference. Mixed-model scheduling sequences products to keep each workstation below takt time on average even when individual products vary in complexity.
Two-takt systems are used when a process has a variable operation that
Two-takt systems are used when a process has a variable operation that occasionally takes longer than takt time (e.g., quality inspection of defective units). The system is designed for a primary takt time for good units, and a secondary path handles anomalies outside the main production flow — preventing occasional long operations from disrupting the entire line's pace.
Takt time adjustments for planned absenteeism in high-attendance-dependent
Takt time adjustments for planned absenteeism in high-attendance-dependent operations — if a production line requires exactly 8 operators to meet takt time but average absenteeism is 10%, the line effectively has 7.2 operators. The line should be designed for 9 operators (to ensure 8 are typically present) or the production schedule should include buffer time for absenteeism coverage. Ignoring this adjustment leads to chronic failure to meet takt time.
| Industry | Typical Demand Rate | Net Available Time/Shift | Typical Takt Time | Implication |
|---|---|---|---|---|
| Automotive assembly (high volume) | 500–600 units/shift | 26,400 sec | 44–53 sec/unit | Every workstation must complete in <1 min |
| Electronics (PCB assembly) | 2,000–10,000/shift | 26,400 sec | 2.6–13 sec/board | Requires highly automated placement |
| Custom machinery | 2–5 units/week | 150,000 sec/week | 30,000–75,000 sec | Days per unit — project-style scheduling |
| Fast food service | 50–150 orders/hour | 3,600 sec/hr | 24–72 sec/order | Defines kitchen throughput design |
| Hospital ED (avg) | 5–8 patients/hour | 3,600 sec/hr | 450–720 sec/patient | 12 min to initiate care per patient |
What is the difference between takt time and cycle time?
Takt time is set by the customer — it's how often the customer wants one unit. Cycle time is set by your process — it's how long it actually takes to produce one unit. Takt time is a target; cycle time is a measurement. The goal is to design all process cycle times to match (or be slightly below) takt time. If cycle time exceeds takt time, you can't meet customer demand. If cycle time is far below takt time, you're producing faster than needed — potentially building inventory waste.
Why does takt time use net available time rather than total shift time?
Production cannot happen during breaks, planned maintenance, and shift meetings — these are necessary planned stops. Using total shift time instead of net available time produces a takt time that the production system cannot realistically achieve, since operators are not available for the full shift. Using net available time gives the true production heartbeat: the pace required during actual production time. This is why takt time calculations must accurately subtract all planned non-production time.
What should I do if takt time is shorter than any possible cycle time?
If customer demand rate exceeds the maximum throughput achievable with current resources, you have a capacity problem. Options include: running additional shifts; adding parallel workstations or machines for bottleneck operations; outsourcing part of the production; automating the slowest operation; asking customers to accept longer lead times; or prioritizing the most profitable orders if capacity is genuinely insufficient. Takt time is reality-checked — if it's physically impossible to achieve, the capacity must be added.
How do I use takt time for line balancing?
Line balancing involves assigning work elements to workstations so that every workstation's cycle time equals takt time — maximizing throughput with minimum operators. Steps: (1) List all work elements with their durations; (2) Calculate takt time; (3) Assign work elements to stations ensuring no station exceeds takt time; (4) Calculate balance efficiency (sum of all CTs ÷ stations × TT); (5) Iterate to improve balance and reduce the number of stations needed. Perfect balance (100% efficiency) is theoretically achievable but rarely achieved in practice due to work element indivisibility.
Can takt time apply to service operations?
Yes — takt time principles apply wherever there is a predictable demand rate and a process to meet it. Call centers use takt time to determine how quickly agents must handle calls (available agent-minutes ÷ expected calls). Restaurants use it to pace kitchen throughput. Hospitals use it to design patient flow through clinical departments. Any process with measurable demand and capacity can be analyzed against takt time to identify whether the process can meet demand.
How should takt time change with demand variability?
In highly variable demand environments, calculate takt time using a planning horizon that smooths out peaks: weekly takt time = weekly available time ÷ weekly demand. If daily demand is too variable, using weekly or monthly takt time prevents overreaction to short-term demand swings. Toyota's heijunka (production leveling) system deliberately smooths customer order variability before it reaches production, presenting the production system with a steady artificial demand rate — enabling a stable takt time even in volatile markets.
What is takt image?
Takt image is the ideal production scenario where every unit is completed at exactly takt time intervals — a perfectly rhythmic production flow where the first part exits at t=0, the next at t=TT, the next at t=2×TT, and so on, indefinitely. Real production has variability that disrupts this ideal image. Takt image serves as the standard against which actual production is compared — any deviation (early or late completion relative to takt time) signals a process abnormality worth investigating and correcting.
プロのヒント
Post the takt time visibly at each workstation and update it whenever demand changes. When operators can see the production heartbeat, they self-regulate pace more naturally — finishing early signals time available for quality checks or kaizen observations; finishing late signals a problem to be escalated. Visible takt time turns every operator into an active production system monitor.
ご存知でしたか？
The concept of takt time was introduced to Japan from Germany in the 1930s when Mitsubishi and Kawasaki engineers studied German aircraft production methods. When Toyota adopted and refined the concept in the 1950s, Taiichi Ohno extended it from setting the production pace to using takt time as the fundamental design constraint for the entire production system — inventory levels, batch sizes, number of operators, machine capacity, everything. This made takt time the single most powerful organizing principle in lean manufacturing.