CTCAE — Common Terminology Criteria for Adverse Events
Select the CTCAE grade that best matches the observed adverse event severity. NCI CTCAE v5.0 framework.
詳細ガイド 近日公開
CTCAE Toxicity Grade Referenceの包括的な教育ガイドを準備中です。ステップバイステップの解説、数式、実例、専門家のヒントをお届けしますので、もうしばらくお待ちください。
The Common Terminology Criteria for Adverse Events (CTCAE) is the internationally standardised classification system developed by the National Cancer Institute (NCI) for documenting and communicating the severity of adverse events in oncology clinical trials and routine cancer care. First published in 1983 as the NCI Common Toxicity Criteria, the system underwent major revisions — with CTCAE v5.0 released in November 2017 being the current standard. The CTCAE encompasses over 800 individual adverse event terms across 26 System Organ Classes (SOC), ranging from haematological toxicities and gastrointestinal effects to neurological, cardiac, and dermatological adverse events. Each term is assigned a severity grade from 1 to 5, allowing clinicians, researchers, and regulatory bodies to assess clinical impact in a consistent and reproducible manner. The grading framework directly informs treatment decisions: Grade 1 events are generally managed symptomatically without dose modification; Grade 2 events require clinical assessment and sometimes dose delays; Grade 3 events almost always necessitate dose interruption or reduction; Grade 4 events are immediately life-threatening and often prompt permanent treatment discontinuation; Grade 5 denotes death related to the adverse event. Beyond individual patient care, CTCAE data are pooled across thousands of trial participants to establish the safety profile of new treatments and to compare toxicity between regimens. Understanding CTCAE grading is essential for every oncology clinician, clinical trial coordinator, and pharmacovigilance professional.
CTCAE Grade = Clinical severity assessment against organ-specific descriptors; Grade 1 = mild, asymptomatic or minimal symptoms, no intervention indicated; Grade 2 = moderate, minimal local or non-invasive intervention indicated, limiting age-appropriate instrumental ADL; Grade 3 = severe, medically significant but not immediately life-threatening, hospitalisation or prolongation indicated; Grade 4 = life-threatening, urgent intervention indicated; Grade 5 = death related to adverse event
- 1Identify the adverse event term that best describes the patient's clinical finding from the relevant System Organ Class (SOC) in CTCAE v5.0; use the most specific term available rather than a general category.
- 2Assess the clinical severity of the event by comparing the patient's presentation against the grade-specific descriptors for that term — each term has unique thresholds (e.g., for anaemia: Grade 1 Hb 10–LLN g/dL; Grade 2 Hb 8–<10 g/dL; Grade 3 Hb <8 g/dL requiring transfusion).
- 3Consider functional impact on activities of daily living: instrumental ADLs (shopping, cooking, managing finances) are used to distinguish Grade 2 from Grade 3; self-care ADLs (bathing, dressing) distinguish Grade 3 from Grade 4 in several domains.
- 4Assign the highest applicable grade — do not split grades; if a patient's presentation spans two grade descriptions, assign the higher grade.
- 5Record the CTCAE grade in the patient's medical record and clinical trial case report form, along with the onset date, duration, and attribution (i.e., likely related to the study drug).
- 6Apply protocol-specified dose modification rules: most oncology protocols define mandatory actions at each grade threshold (e.g., hold treatment at Grade 3, discontinue at Grade 4, with specific exceptions noted).
- 7Re-evaluate the adverse event at each follow-up visit, updating the grade as the event resolves, improves, worsens, or becomes a new baseline — capturing the trajectory is as important as the peak grade.
Grade 2 would require limiting instrumental ADLs (e.g., difficulty buttoning shirt); Grade 3 would limit self-care ADLs.
Peripheral neuropathy is graded by functional impact rather than purely sensory testing; careful ADL assessment is essential.
Grade 4 febrile neutropenia would be life-threatening with urgent intervention (e.g., ICU admission); Grade 3 is the minimum for febrile neutropenia by definition.
Febrile neutropenia starts at Grade 3 in CTCAE v5.0 — there are no Grade 1 or 2 categories for this term because the combination of fever and neutropenia always carries significant risk.
Grade 3 would be ≥7 stools/day, incontinence, hospitalisation, or limiting self-care ADL.
Diarrhoea grading depends on stool frequency above the patient's personal baseline, not an absolute number — always establish the baseline frequency before treatment.
Grade 3 = >5–20 × ULN; Grade 4 = >20 × ULN. Many protocols mandate treatment hold at Grade 3.
Hepatotoxicity grading uses multiples of the upper limit of normal (ULN) rather than absolute values, making it universally applicable across laboratories.
Clinical trial safety reporting: CTCAE grades are collected as mandatory data fields in all NCI-sponsored and most industry oncology trials for regulatory submission.. This application is commonly used by professionals who need precise quantitative analysis to support decision-making, budgeting, and strategic planning in their respective fields
Treatment protocol dose modification tables reference CTCAE grades to standardise hold/reduce/discontinue decisions across clinical sites.. Industry practitioners rely on this calculation to benchmark performance, compare alternatives, and ensure compliance with established standards and regulatory requirements
Pharmacovigilance teams use CTCAE Grade 4–5 events to detect safety signals and trigger regulatory risk communications or label updates.. Academic researchers and students use this computation to validate theoretical models, complete coursework assignments, and develop deeper understanding of the underlying mathematical principles
Oncology nurse practitioners use CTCAE criteria to assess symptom severity at each clinical visit and determine whether urgent medical review is needed.. Financial analysts and planners incorporate this calculation into their workflow to produce accurate forecasts, evaluate risk scenarios, and present data-driven recommendations to stakeholders
Health technology assessment bodies use pooled CTCAE data from clinical trials to compare the toxicity burden of competing therapies in cost-effectiveness analyses.. This application is commonly used by professionals who need precise quantitative analysis to support decision-making, budgeting, and strategic planning in their respective fields
Immunotherapy-specific grading
Immune checkpoint inhibitor adverse events (irAEs) often require different management algorithms than conventional chemotherapy toxicities. For example, Grade 2 immune colitis may require systemic corticosteroids and treatment hold — a response more aggressive than standard Grade 2 management. ESMO and ASCO publish irAE-specific management guidelines that overlay CTCAE grading.
Subjective adverse events — patient-reported outcomes
For symptoms such as fatigue, pain, and nausea, CTCAE grade depends on patient-reported severity and its impact on function. PRO-CTCAE (Patient-Reported Outcomes version of CTCAE) was developed to capture these from the patient perspective directly, reducing clinician under-reporting bias for subjective toxicities.
Lab abnormalities without symptoms
Some CTCAE terms describe laboratory findings without clinical symptoms (e.g., asymptomatic ALT elevation). These are graded on the basis of fold-change from the upper limit of normal (ULN) or clinical thresholds. Grade 1–2 lab abnormalities without symptoms often do not require dose modification but must still be recorded.
CTCAE in paediatric oncology
Age-appropriate ADL references differ in paediatric populations. CTCAE v5.0 acknowledges this and uses age-adjusted language for some terms. Paediatric trials may supplement CTCAE with paediatric-specific toxicity scales such as the Pediatric Adverse Events Reporting System (PedAERs).
| Grade | Severity | Functional Impact | Typical Action |
|---|---|---|---|
| 1 | Mild | Asymptomatic; no limitation of ADLs | Continue treatment; monitor |
| 2 | Moderate | Limits instrumental ADLs (shopping, cooking) | Consider dose delay; supportive care |
| 3 | Severe | Limits self-care ADLs; hospitalisation indicated | Hold treatment; dose reduce on restart |
| 4 | Life-threatening | Urgent intervention required; ICU may be needed | Discontinue treatment; emergency management |
| 5 | Death | Adverse event-related fatality | SAE reporting; regulatory notification |
What does CTCAE Grade 5 mean?
Grade 5 denotes death caused by or directly related to the adverse event. It is recorded when a patient dies due to treatment toxicity rather than disease progression. Accurate attribution between drug-related and disease-related death is required for regulatory reporting. In practice, this concept is central to ctcae grading because it determines the core relationship between the input variables. Understanding this helps users interpret results more accurately and apply them to real-world scenarios in their specific context.
How does CTCAE v5.0 differ from earlier versions?
CTCAE v5.0 (2017) refined grade descriptors for several terms, removed some legacy terms, added new toxicity categories (e.g., immunotherapy-related adverse events), and aligned language with real-world clinical practice. Earlier versions (v3.0, v4.0) are still referenced in published trial data, so version should always be specified. The process involves applying the underlying formula systematically to the given inputs. Each variable in the calculation contributes to the final result, and understanding their individual roles helps ensure accurate application.
Can the same adverse event be graded differently by different clinicians?
Yes, inter-rater variability exists, particularly for subjective symptoms (fatigue, pain, nausea) and functional assessments. Training programmes, calibration exercises, and clear protocol definitions help reduce variability. Some trials use patient-reported outcome (PRO) tools alongside CTCAE to capture symptom burden from the patient perspective. This is an important consideration when working with ctcae grading calculations in practical applications. The answer depends on the specific input values and the context in which the calculation is being applied.
Is CTCAE used outside oncology?
CTCAE was developed for oncology but is now used in HIV/AIDS research, transplant medicine, vaccine safety studies, and some non-oncological drug trials where systematic adverse event capture is required. Its terminology is recognised by the FDA, EMA, and ICH guidelines. This is an important consideration when working with ctcae grading calculations in practical applications. The answer depends on the specific input values and the context in which the calculation is being applied.
What is the difference between an adverse event and a serious adverse event?
A serious adverse event (SAE) is defined by regulatory criteria: death, life-threatening, hospitalisation, persistent disability, or congenital anomaly. SAEs do not map directly to CTCAE grades; a Grade 3 event requiring hospitalisation is typically an SAE, but not all Grade 3 events meet SAE criteria. In practice, this concept is central to ctcae grading because it determines the core relationship between the input variables.
How does CTCAE grading relate to dose modification decisions?
Most clinical trial protocols and prescribing information documents include specific dose modification tables referencing CTCAE grades. Grade 1 typically = continue with monitoring; Grade 2 = consider dose delay; Grade 3 = dose hold or reduction; Grade 4 = permanent discontinuation (with some exceptions). Exact rules vary by drug and indication.
Are there organ-specific CTCAE grades for immunotherapy toxicities?
Yes. CTCAE v5.0 includes terms for immune-related adverse events (irAEs) such as immune-mediated colitis, pneumonitis, hepatitis, and thyroid disorders. Separate management guidelines (e.g., ESMO, ASCO) map irAE grades to corticosteroid dosing and immunotherapy hold/discontinuation decisions. This is an important consideration when working with ctcae grading calculations in practical applications. The answer depends on the specific input values and the context in which the calculation is being applied.
How is CTCAE different from RECIST?
CTCAE measures treatment toxicity (adverse events), while RECIST (Response Evaluation Criteria in Solid Tumours) measures tumour response to treatment. Both systems are used concurrently in oncology trials — RECIST informs efficacy data and CTCAE informs safety data. The process involves applying the underlying formula systematically to the given inputs. Each variable in the calculation contributes to the final result, and understanding their individual roles helps ensure accurate application.
プロのヒント
Always read the grade-specific descriptors for the exact CTCAE term you are grading — do not rely on the generic 1–5 definitions. For example, 'febrile neutropenia' starts at Grade 3 by definition, while 'neutrophil count decreased' has Grade 1–4 categories. The term-specific criteria override the generic severity ladder.
ご存知でしたか？
The CTCAE document spans over 200 pages and contains more than 800 unique adverse event terms. The NCI makes the full document freely available online and updates it based on emerging treatment modalities — the addition of immunotherapy-specific terms in recent versions reflects the revolution in cancer immunotherapy since 2010.