⚾ERA+ Calculator
詳細ガイド 近日公開
ERA+ Calculatorの包括的な教育ガイドを準備中です。ステップバイステップの解説、数式、実例、専門家のヒントをお届けしますので、もうしばらくお待ちください。
ERA+ (Adjusted ERA) solves one of the most persistent problems in comparing pitchers across different eras, leagues, and ballparks: a 3.00 ERA in the 1990s steroid era was dramatically harder to achieve than a 3.00 ERA in the pitcher-dominated 1960s. ERA+ normalizes ERA to a universal scale by comparing each pitcher's ERA to the league average and adjusting for their home ballpark's run-scoring environment. The result is a ratio scaled to 100, where 100 represents exactly league average. An ERA+ of 150 means the pitcher was 50% better than league average — allowing runs at only 67% of the rate of a typical pitcher in the same environment. An ERA+ of 200, achieved by only a handful of pitchers in history for a full season, means the pitcher was twice as good as league average. Conversely, an ERA+ of 80 means the pitcher was 20% worse than league average. This scaling makes ERA+ one of the most powerful cross-era comparison tools in baseball. Walter Johnson's career ERA+ of 147 can be meaningfully compared to Pedro Martinez's career 154 or Roger Clemens's 143, even though they pitched in wildly different offensive environments. Pedro Martinez's 2000 season produced an ERA+ of 291 — one of the highest single-season values ever recorded — reflecting how he was not just elite but historically dominant relative to the league. ERA+ is computed by Baseball-Reference and is part of their standard pitcher statistics. It uses park-adjusted league ERA rather than raw league ERA, meaning a pitcher who calls Coors Field home gets credit for pitching in the most run-favorable environment in baseball. This is crucially important — a pitcher posting a 4.20 ERA at Coors Field may be more impressive than one posting a 3.80 ERA at Petco Park. Modern analysts typically prefer FIP-based metrics for prospective evaluation, but ERA+ remains the gold standard for historical comparison and Hall of Fame discussions, where actual run prevention (including the interaction with real defenses and real environments) matters for legacy assessment.
ERA+ = 100 × (lgERA_park_adjusted / ERA) Where: - lgERA_park_adjusted = League-average ERA adjusted for the pitcher's home park factor - ERA = The pitcher's earned run average - 100 = The scale anchor (100 = league average) Park Factor Integration: lgERA_adjusted = lgERA × (2 - Park Factor) Where Park Factor > 1.0 = hitter-friendly park, < 1.0 = pitcher-friendly park Worked Example (Pedro Martinez, 2000): Pedro ERA = 1.74, lgERA = 4.91, Park Factor (Fenway) ≈ 1.02 lgERA_adjusted = 4.91 × (2 - 1.02) = 4.91 × 0.98 = 4.81 ERA+ = 100 × (4.81 / 1.74) = 100 × 2.764 = 276 ERA+ (Official Baseball-Reference value was 291 due to more precise park calculations)
- 1Find the pitcher's ERA for the season or career being evaluated from Baseball-Reference, which also publishes ERA+ directly in their standard pitching tables.
- 2Identify the league-average ERA for that specific season and league (AL or NL are calculated separately) — this baseline shifts considerably by era, from below 3.00 in the 1960s to above 5.00 in 2019.
- 3Apply the park factor for the pitcher's home stadium, which Baseball-Reference calculates as a multi-year average of run scoring in that park relative to all other parks — Coors Field has historically had a park factor around 1.15–1.20 (heavily hitter-friendly).
- 4Adjust the league ERA using the park factor so pitchers at hitter-friendly parks are compared to a higher effective league average, giving them appropriate credit for their environment.
- 5Divide the park-adjusted league ERA by the pitcher's ERA, then multiply by 100 to produce the ERA+ value.
- 6Interpret the result on the 100-scale: values above 100 indicate above-average performance, below 100 indicates below-average, and elite seasons often exceed 150–200.
- 7For career ERA+, the calculation uses a weighted average of seasonal ERA+ values, weighted by innings pitched in each season to prevent small dominant samples from skewing the career number.
Pedro's 2000 season is statistically the most dominant relative to league in the modern era. He was nearly three times better than the average AL pitcher in the highest-scoring offensive environment of the Steroid Era.
deGrom's 2021 ERA+ was historically absurd — but it's limited by small sample size (just 92 IP due to injury). In the innings he threw, he was literally four times better than league average, the highest rate ever for a qualifying-level sample.
An ERA+ of 120 represents a genuinely good pitcher — 20% better than league average in a neutral park. This is a mid-rotation All-Star caliber season deserving of a solid multi-year contract.
Even though this pitcher's ERA appears near league average, their pitcher-friendly park masks a below-average performance. ERA+ correctly identifies them as a slightly below-average pitcher once environment is removed.
Electrical engineers in power distribution companies use Era Plus Calculator to size conductors, calculate voltage drop across long cable runs, and verify that circuit breaker ratings provide adequate protection against fault currents in residential, commercial, and industrial installations.
Historical researchers use ERA+ to build all-time rankings of pitching seasons and careers across eras, enabling meaningful lists like 'Top 50 Pitching Seasons in MLB History' that span 100+ years.
Broadcast analysts reference ERA+ during award season discussions to explain why a pitcher with a higher ERA can still be more deserving of the Cy Young than a competitor in a lower run-environment league or park.
Electronics design engineers apply Era Plus Calculator during printed circuit board layout to determine trace widths for required current capacity, calculate impedance matching for high-speed signal traces, and verify thermal dissipation in surface-mount components under worst-case operating conditions.
Open circuit or infinite resistance
In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in era plus calculatorulator calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.
Short circuit condition
In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in era plus calculatorulator calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.
Reactive component dominance
In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in era plus calculatorulator calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.
| ERA+ | Quality Label | Historical Example | Approximate Frequency |
|---|---|---|---|
| 200+ | All-Time Historic Season | Pedro 2000 (291), deGrom 2021 | < 5 qualifying seasons ever |
| 160–200 | Cy Young / Dominant | Kershaw 2014 (197), Clemens 1997 | ~5–10 seasons per decade |
| 140–160 | Elite All-Star | Scherzer, Verlander peak years | Top 5–10 pitchers annually |
| 120–140 | Above Average / Solid | Quality #2 starters | Top 20–30 pitchers annually |
| 100–120 | League Average to Solid | Mid-rotation starters | Middle of the league |
| 80–100 | Below Average | Back-end starters | Bottom 30–40% of MLB starters |
| < 80 | Poor | Spot starters, replacement level | Typically brief MLB tenures |
What is a good ERA+ for a starting pitcher?
Era Plus Calculator is a specialized calculation tool designed to help users compute and analyze key metrics in the engineering and electrical domain. It takes specific numeric inputs — typically drawn from real-world data such as measurements, rates, or quantities — and applies a validated mathematical formula to produce actionable results. The tool is valuable because it eliminates manual calculation errors, provides instant feedback when exploring different scenarios, and serves as both a decision-support instrument for professionals and a learning aid for students studying the underlying principles.
How does ERA+ compare pitchers from different eras?
In the context of Era Plus Calculator, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
Who has the highest career ERA+ in MLB history?
In the context of Era Plus Calculator, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
Does ERA+ account for ballpark effects?
Yes — this is ERA+'s primary advantage over raw ERA. A pitcher at Coors Field (park factor ~1.15) is compared to a higher baseline league ERA, giving them full credit for pitching in the most run-favorable park in baseball. Without this adjustment, Coors Field pitchers would always look worse than they actually are.
What is the difference between ERA+ and ERA-?
Era Plus Calculator is a specialized calculation tool designed to help users compute and analyze key metrics in the engineering and electrical domain. It takes specific numeric inputs — typically drawn from real-world data such as measurements, rates, or quantities — and applies a validated mathematical formula to produce actionable results. The tool is valuable because it eliminates manual calculation errors, provides instant feedback when exploring different scenarios, and serves as both a decision-support instrument for professionals and a learning aid for students studying the underlying principles.
Is ERA+ or FIP more useful for evaluating pitchers?
In the context of Era Plus Calculator, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
Can ERA+ be used for relievers?
In the context of Era Plus Calculator, this depends on the specific inputs, assumptions, and goals of the user. The underlying formula provides a deterministic relationship between inputs and output, but real-world application requires interpreting the result within the broader context of engineering and electrical practice. Professionals typically cross-reference calculator output with industry benchmarks, historical data, and regulatory requirements. For the most reliable results, ensure inputs are sourced from verified data, understand which assumptions the formula makes, and consider running multiple scenarios to bracket the range of likely outcomes.
プロのヒント
When evaluating Hall of Fame candidates, use career ERA+ in conjunction with career WAR and peak WAR (best 7 seasons). A pitcher with a career 130+ ERA+ and 60+ career WAR has a very strong case regardless of their win total — pitcher wins are heavily context-dependent and should never be the primary criterion.
ご存知でしたか？
Pedro Martinez's 2000 season is so statistically dominant that analysts have noted he was better against the American League than the AL average by a margin similar to how an average MLB pitcher compares to a high school varsity pitcher. His ERA was 1.74 in a season when the AL average was 4.91 — an environment featuring Jeter, A-Rod, Giambi, Thome, and the peak Steroid Era lineup card.