상세 가이드 곧 제공 예정
Reinsurance Treaty Calculator에 대한 종합 교육 가이드를 준비 중입니다. 단계별 설명, 공식, 실제 예제 및 전문가 팁을 곧 확인하세요.
Reinsurance is a financial arrangement in which one insurance company (the ceding company or cedant) transfers a portion of the risks it has underwritten to another insurance company (the reinsurer), in exchange for a portion of the insurance premium. The fundamental purpose of reinsurance is to allow the ceding company to manage its risk concentration, reduce earnings volatility, stabilize loss ratios, increase underwriting capacity beyond what its capital alone would support, and protect against catastrophic losses. Without reinsurance, individual insurers would be unable to underwrite large individual risks (skyscrapers, oil rigs, commercial aircraft) or accumulations of risk in geographic areas prone to natural catastrophes (hurricane, earthquake, flood). Reinsurance also allows new or small insurance companies to grow their business beyond what their limited capital would permit. There are two broad categories of reinsurance: proportional (pro-rata) reinsurance and non-proportional (excess-of-loss) reinsurance. In proportional reinsurance, the reinsurer shares a fixed percentage of each risk — receiving the same percentage of premium and paying the same percentage of each loss. The two types of proportional treaties are quota share (a fixed percentage applies to all business in the portfolio) and surplus share (the reinsurer takes a variable percentage based on policy size, typically covering policies above a retention line). In non-proportional reinsurance, the reinsurer pays only when losses exceed a specified retention amount. Excess-of-loss (XL) treaties can be structured on a per-risk basis (protecting against large individual claims), per-occurrence (protecting against catastrophic events affecting many policies), or aggregate (protecting against a high total loss volume in a period). Understanding reinsurance mathematics — how premiums are allocated, how losses are shared, and how ceding commissions affect net economics — is essential for insurance company financial management and actuarial analysis.
Reinsurance Calc Calculation: Step 1: Identify the reinsurance structure: proportional (quota share or surplus share) or non-proportional (per-risk XL, per-occurrence XL, or aggregate XL). Step 2: For quota share: multiply each original loss by the ceded percentage to calculate reinsurer's share; multiply each original premium by the ceded percentage and subtract the ceding commission to calculate net reinsurance cost. Step 3: For surplus share: calculate the net retention for each risk (typically a dollar amount per line), cede the excess above the retention up to treaty limits, with the ceded percentage varying by policy size. Step 4: For per-risk excess-of-loss: apply the retention and limit for each individual loss; reinsurer pays max(0, min(Loss − Retention, Limit)) for each separate risk. Step 5: For per-occurrence XL: aggregate all losses from a single event (natural disaster, terrorism), subtract the retention, and apply the treaty limit to calculate reinsurer recovery. Step 6: Calculate the net position: ceding company retains premiums net of ceded premium, plus any ceding commission received, minus net retained losses. Step 7: Calculate the loss ratio at each level (gross, ceded, net) to assess the effectiveness of the reinsurance structure in achieving the ceding company's risk management objectives. Each step builds on the previous, combining the component calculations into a comprehensive reinsurance result. The formula captures the mathematical relationships governing reinsurance behavior.
- 1Identify the reinsurance structure: proportional (quota share or surplus share) or non-proportional (per-risk XL, per-occurrence XL, or aggregate XL).
- 2For quota share: multiply each original loss by the ceded percentage to calculate reinsurer's share; multiply each original premium by the ceded percentage and subtract the ceding commission to calculate net reinsurance cost.
- 3For surplus share: calculate the net retention for each risk (typically a dollar amount per line), cede the excess above the retention up to treaty limits, with the ceded percentage varying by policy size.
- 4For per-risk excess-of-loss: apply the retention and limit for each individual loss; reinsurer pays max(0, min(Loss − Retention, Limit)) for each separate risk.
- 5For per-occurrence XL: aggregate all losses from a single event (natural disaster, terrorism), subtract the retention, and apply the treaty limit to calculate reinsurer recovery.
- 6Calculate the net position: ceding company retains premiums net of ceded premium, plus any ceding commission received, minus net retained losses.
- 7Calculate the loss ratio at each level (gross, ceded, net) to assess the effectiveness of the reinsurance structure in achieving the ceding company's risk management objectives.
Quota share reduces both profit and loss proportionally; primary benefit is capital relief and earnings stability
Under this 40% quota share, the reinsurer takes 40% of all premium and pays 40% of all losses, returning a 25% ceding commission on ceded premium. The ceding company retains 60% of premium ($30M) plus the $5M ceding commission ($35M total income) against $18M in retained losses, producing a $17M net profit on a $32M gross profit. The reinsurer's economics: $20M premium − $5M CC − $12M losses = $3M profit (15% margin). Quota share allows the ceding company to effectively write more business per dollar of capital.
The $3.2M loss is capped at $2.0M recovery (limit); excess above $2.5M total ($500K retention + $2M limit) remains with the cedant
The $150K loss is below the $500K retention — no reinsurance recovery. The $750K loss: retention $500K, recovery $250K. The $1.8M loss: retention $500K, recovery $1.3M. The $3.2M loss: retention $500K, limit $2M, recovery $2.0M (capped), leaving $700K ($3.2M − $500K − $2M) retained above the limit. Per-risk XL treaties typically have a maximum recovery per occurrence — losses exceeding the retention plus limit remain the cedant's exposure.
$15M in losses above the $70M combined retention+limit remains with the cedant — demonstrating need for additional protection layers
A single $85M hurricane event is split three ways: the cedant retains the first $20M (the attachment point), the reinsurer pays from $20M to $70M ($50M limit), and the cedant retains the remaining $15M above the limit. This $15M in excess-of-limit loss illustrates why insurers often purchase multiple XL layers — the first layer $20M xs $20M, a second layer $50M xs $40M, potentially a third layer for further protection. The cost of adding additional limit layers must be weighed against the probability and expected cost of reaching each layer.
Aggregate stop-loss limits the cedant's annual loss ratio to 75% (the attachment point), protecting annual earnings
An aggregate stop-loss (ASL) treaty protects against a bad year where the cumulative loss ratio exceeds a threshold. With an 88% actual loss ratio against a 75% attachment, the ASL pays $13M (88% − 75% = 13 points × $100M). The 20-point limit means the reinsurer pays up to $20M (if the loss ratio reached 95%), above which additional losses return to the cedant. ASL treaties are expensive because they directly protect the insurer's earnings and represent significant reinsurer risk — often used by specialty insurers or startups that cannot tolerate high earnings volatility.
Insurance company capital management: CFOs use reinsurance models to optimize the balance between retained risk, capital requirements, and reinsurance cost, representing an important application area for the Reinsurance Calc in professional and analytical contexts where accurate reinsurance calculations directly support informed decision-making, strategic planning, and performance optimization
Catastrophe risk management: property insurers model PML (probable maximum loss) and purchase XL layers to limit potential losses from major natural catastrophes, representing an important application area for the Reinsurance Calc in professional and analytical contexts where accurate reinsurance calculations directly support informed decision-making, strategic planning, and performance optimization
Rating agency capital modeling: insurers use reinsurance in capital models submitted to AM Best, S&P, and Moody's to demonstrate adequate capitalization, representing an important application area for the Reinsurance Calc in professional and analytical contexts where accurate reinsurance calculations directly support informed decision-making, strategic planning, and performance optimization
New market entry: startup insurers use quota share treaties to leverage experienced reinsurers' expertise and capital while building underwriting track records, representing an important application area for the Reinsurance Calc in professional and analytical contexts where accurate reinsurance calculations directly support informed decision-making, strategic planning, and performance optimization
Actuarial reserving: casualty actuaries model ceded loss development on XL treaties to properly value reinsurance recoverable assets, representing an important application area for the Reinsurance Calc in professional and analytical contexts where accurate reinsurance calculations directly support informed decision-making, strategic planning, and performance optimization
{'case': 'Reinstatement provisions', 'description': 'Most per-occurrence XL treaties include reinstatement provisions that restore treaty capacity after a loss, allowing the cedant to use the full limit again in the same year if a second event occurs. Reinstatements may be free (no additional premium) or paid (typically 100% of the pro-rata reinsurance premium for the reinstated limit).'}
{'case': 'Loss corridor provisions', 'description': "Some treaties include a loss corridor where the cedant retains an additional slice of loss between two XL layers. For example, the cedant might retain 100% of losses between $30M and $40M within a treaty that otherwise covers $10M to $30M and $40M to $70M — requiring the cedant to have 'skin in the game' and reducing moral hazard."}
In the Reinsurance Calc, this scenario requires additional caution when interpreting reinsurance results. The standard formula may not fully account for all factors present in this edge case, and supplementary analysis or expert consultation may be warranted. Professional best practice involves documenting assumptions, running sensitivity analyses, and cross-referencing results with alternative methods when reinsurance calculations fall into non-standard territory.
| Treaty Type | Premium Allocation | Loss Allocation | Ceding Commission | Primary Use Case |
|---|---|---|---|---|
| Quota Share | Fixed % (e.g., 40%) | Fixed % (e.g., 40%) | 20–35% | Capital relief, proportional risk sharing |
| Surplus Share | Variable % by policy size | Variable % by policy size | 25–35% | Property lines, large policy capacity |
| Per-Risk XL | Flat reinsurance premium | Max(0, Loss − Retention) up to Limit | None typically | Large individual risk protection |
| Per-Occurrence Cat XL | Flat reinsurance premium | Aggregate event loss per structure | None typically | Catastrophe earnings protection |
| Aggregate Stop-Loss | % of premium or flat | Above attachment, up to limit | May include profit commission | Loss ratio stabilization |
| Catastrophe Bond | Coupon payment | Principal at risk if trigger met | N/A (capital markets) | Alternative capital, cat capacity |
What is the difference between treaty and facultative reinsurance?
Treaty reinsurance covers an entire portfolio or class of business under a pre-negotiated agreement — the reinsurer commits to accept all qualifying business within the treaty's scope without individual risk selection. Treaty reinsurance provides the ceding company with certainty about reinsurance availability and is used for ongoing portfolio management. Facultative reinsurance is placed on a risk-by-risk basis — the ceding company shops individual risks in the reinsurance market and the reinsurer decides whether to accept each submission. Facultative reinsurance is used for large or unusual individual risks that exceed treaty limits, for classes of business excluded from existing treaties, or when a risk has unusual characteristics requiring individual pricing. Treaty reinsurance is far more common by premium volume, while facultative is essential for large individual risk placements in property, marine, aviation, and specialty lines.
What is a ceding commission and how does it affect the economics?
A ceding commission (also called an acquisition commission or cedant's profit commission) is the percentage of the ceded premium that the reinsurer pays back to the ceding company. It is the reinsurer's contribution toward the original insurer's policy acquisition costs (agent commissions, marketing) and administrative expenses. Ceding commissions typically range from 20–35% of ceded premium for quota share treaties. A sliding scale commission adjusts the ceding commission based on the treaty's actual loss ratio — if losses are lower than expected, the cedant earns a higher commission; if losses are worse, the commission is lower, aligning incentives. From the ceding company's perspective, the ceding commission reduces the net cost of reinsurance. From the reinsurer's perspective, the commission reduces the effective premium available to pay claims and generate profit, making it a key negotiating point in treaty terms.
Why do insurance companies use reinsurance?
Insurance companies use reinsurance for multiple interconnected purposes. Capital management: reinsurance allows insurers to write more premium than their capital alone would permit — ceding premium and risk to reinsurers effectively leverages capital and supports premium growth. Catastrophe protection: XL treaties protect against extreme events that could threaten solvency — a single major earthquake or hurricane without reinsurance could exceed an insurer's equity. Earnings stabilization: proportional and aggregate treaties smooth the insurer's loss ratio year-over-year, making earnings more predictable for investors and rating agencies. Large risk capacity: individual risks too large for one company's capacity (a $500M commercial property, a supertanker) are made insurable through reinsurance. Regulatory capital relief: in some regulatory frameworks, reinsurance recoveries reduce required regulatory capital, improving solvency ratios. Expertise access: new entrants to specialty markets use reinsurance to access the reinsurer's underwriting expertise and risk management guidance.
What is retrocessional reinsurance?
Retrocession is reinsurance purchased by a reinsurer from another reinsurer (called a retrocessionaire). Just as primary insurers buy reinsurance to transfer risk, reinsurers also transfer a portion of their accumulated risk to reduce their own concentration and catastrophe exposure. The retrocessional market is a layer of the global risk transfer chain: primary insurer → reinsurer → retrocessionaire. In some complex risk transfer chains, risks pass through multiple layers of retrocession. The global retrocessional market is smaller and less liquid than the primary reinsurance market, and capacity can be severely constrained after major catastrophes when reinsurers and retrocessionaires reassess their aggregate exposures. The 2005 (Katrina/Rita/Wilma) and 2017 (Harvey/Irma/Maria) hurricane seasons caused significant retrocessional market disruptions, driving up rates for all subsequent years.
How do reinsurance rating agencies evaluate reinsurer financial strength?
AM Best, S&P, Moody's, and Fitch all rate reinsurer financial strength, with AM Best being the most specific to the insurance industry. Reinsurer ratings assess: capital adequacy relative to the risks assumed (using models similar to Basel capital requirements for banks), underwriting profitability and loss ratio history, investment portfolio quality and duration management, management quality and strategic direction, enterprise risk management framework, and competitive position in the market. For ceding companies, reinsurer financial strength is critically important — if the reinsurer becomes insolvent, the ceding company remains liable for the original policyholder claims and loses expected reinsurance recoveries. Most professional buyers require reinsurers to carry at least an A- AM Best financial strength rating, with many requiring A or better. Diversification across multiple reinsurers (avoiding concentration with any single counterparty) is also a standard risk management practice.
What is loss development in reinsurance accounting?
Loss development refers to the process by which initially estimated losses change over time as more information becomes available. When a loss first occurs (particularly in liability insurance), the ultimate cost may not be known for years — medical treatment continues, litigation proceeds, and final settlements are reached. Actuaries use loss development triangles to project how losses reported at early maturities will ultimately develop to their final settled amounts. In reinsurance, loss development is particularly important because XL treaties may have losses that start below the retention but develop to exceed it as claims worsen over time (known as 'late developing' excess losses). Loss development assumptions are key inputs in IBNR reserve calculations, and the selection of appropriate development patterns is one of the most consequential actuarial judgments in the casualty insurance reserving process.
What are the major types of catastrophe reinsurance and how do they differ?
Traditional catastrophe excess-of-loss reinsurance pays based on the ceding company's actual insured losses from a qualifying event. This is the most common and straightforward structure. Parametric catastrophe reinsurance pays based on a trigger parameter (wind speed at a specific location, earthquake magnitude at specified coordinates) regardless of actual losses — faster payment with no loss adjustment, but basis risk exists between the parametric trigger and actual losses. Industry Loss Warranties (ILWs) pay when both the insured's losses exceed a threshold AND an industry-wide loss index (like PCS for U.S. property) exceeds a specified level. Catastrophe bonds (cat bonds) are capital market instruments that transfer catastrophe risk to investors — the issuer receives premium and principal if a triggering event occurs, while investors receive above-market yields in non-loss years. Each structure offers different trade-offs between basis risk, speed of payment, cost, and capacity.
전문가 팁
Proportional reinsurance (quota share and surplus share) transfers a fixed percentage of risk, premium, and loss, providing capital relief. Excess-of-loss (XL) reinsurance provides catastrophe protection above a retention, primarily managing earnings volatility.
알고 계셨나요?
Munich Re, Swiss Re, and Berkshire Hathaway Reinsurance are the three largest global reinsurers. The global reinsurance market writes approximately $350 billion in premiums annually, providing the 'insurance for insurers' that enables the primary insurance industry to underwrite risks far beyond any individual company's capital capacity.