상세 가이드 곧 제공 예정
Cricket Fielding Stats Calculator에 대한 종합 교육 가이드를 준비 중입니다. 단계별 설명, 공식, 실제 예제 및 전문가 팁을 곧 확인하세요.
For most of cricket's 150-year analytical history, fielding was the sport's invisible skill — tracked only through catches taken and a vague reputation for being 'good in the field'. That changed dramatically with the introduction of ball-tracking cameras and GPS performance systems in the 2010s. By 2020, every major cricket board was collecting fielding data at the ball-by-ball level: distance covered per match, dive frequency, arm strength on throwing, reaction time to first movement, and catch completion rates under varying difficulty ratings. Jonty Rhodes is often cited as cricket's first true fielding revolutionary — his diving run-outs and athleticism in South Africa's 1992 World Cup campaign created a template for what elite fielding could look like. But today's data shows that fielding is not just about spectacular moments: it is about quantifiable impact on match outcomes. Research using IPL and international data shows that elite fielding (defined as saving 10 or more runs per match through catching, run prevention, and boundary saving) contributes approximately 15-20 additional expected runs to a team's effective total — equivalent to a substantial batting contribution. The metrics of modern fielding analytics include: Catches Taken and Catch Completion Rate (catches taken vs. chances offered), Run-out contributions (direct hits and indirect assists), Boundary saves (balls intercepted at the rope), Ground coverage (distance covered per match, measured by GPS), and Throwing accuracy (direct-hit probability from specific field positions). These metrics collectively produce a Fielding Impact Rating that allows systematic comparison of fielders. In T20 cricket especially, fielding has become a selection criterion as explicit as batting strike rate or bowling economy. Franchises that field poorly concede an estimated 15-25 extra runs per match from dropped catches and missed run-outs — a margin that frequently determines match outcomes in T20 cricket where 10-15 runs separates winners and losers in a majority of matches.
Fielding Statistics Key Metrics:
1. Catch Completion Rate (CCR):
CCR = Catches_Taken / Total_Chances_Offered x 100
Difficulty-weighted CCR = Sum(Difficulty_Weight x Catch_Taken) / Sum(Difficulty_Weight)
Difficulty Weights: Easy=1, Moderate=2, Difficult=3, Exceptional=4
2. Fielding Impact Score (FIS):
FIS = (Catches x 10) + (Direct_Runouts x 15) + (Indirect_Runouts x 8)
+ (Boundary_Saves x 4) + (Dot_Ball_Saves x 2)
3. Run Prevention Rate (RPR):
RPR = (Expected_Runs_Conceded - Actual_Runs_Conceded) / Overs_Fielded
Positive RPR = fielding team saved more runs than expected
4. Fielding Rating (0-100 scale):
FR = (CCR x 0.4) + (Runout_Contribution x 0.3) + (Ground_Coverage_Score x 0.2) + (Throw_Accuracy x 0.1)
Worked Example — Tournament-Level Fielding Assessment:
Player A: 8 catches (6 taken from 8 chances), 2 direct run-outs, 1 indirect, 12 boundary saves
CCR = 6/8 x 100 = 75%
FIS = (6 x 10) + (2 x 15) + (1 x 8) + (12 x 4) = 60 + 30 + 8 + 48 = 146
Fielding Rating (with ground coverage 72%): FR = (75 x 0.4) + (40 x 0.3) + (72 x 0.2) + (65 x 0.1)
= 30 + 12 + 14.4 + 6.5 = 62.9 / 100- 1Record every fielding chance — catches offered (including drops), run-out opportunities (both direct and indirect), and boundary-save attempts — across all fielding innings, assigning difficulty ratings to each event based on judged complexity.
- 2Calculate the catch completion rate by dividing catches successfully taken by total chances offered; apply difficulty weighting if granular chance data is available to separate routine catches from exceptional ones.
- 3Track run-out contributions by crediting direct-hit run-outs fully (the fielder threw the ball that hit the stumps) and indirect contributions with partial credit (the fielder threw to an end that a different fielder collected and broke the stumps).
- 4Measure boundary saves by counting the number of deliveries where a fielder's interception at the rope prevented a four — this requires ball-tracking or video analysis to determine counterfactual boundary probability.
- 5Calculate ground coverage distance using GPS tracking worn by fielders during matches, converting to a per-match metric that captures total distance run during the fielding innings.
- 6Combine the individual metrics into a Fielding Impact Score to produce a single comparable number across matches and tournaments, allowing ranking of fielders within squads and against global benchmarks.
- 7Contextualize fielding statistics by position: a fielder at boundary typically has more boundary-save opportunities and fewer catching chances than a slip fielder; direct comparison requires position normalization.
An 85.7% catch completion rate with 3 direct run-outs and 18 boundary saves across 14 matches represents world-class fielding. This type of performance contributes an estimated 40-50 saved runs across the tournament.
Jonty Rhodes's statistical profile as estimated from historical records shows a catches-per-match rate 58% above the peer average for outfielders of his era — a gap attributable to exceptional positioning, reading of play, and athleticism.
Dhoni's wicketkeeping statistics are the benchmark against which all modern wicketkeepers are measured. His stumping speed — consistently sub-0.1 seconds from gloves to stumps — is quantified by high-speed camera analysis at approximately 0.08 seconds average.
A team that drops 5 catches and misses 3 run-outs concedes approximately 11 wickets' worth of extra batting, which at average scoring rates translates to 79 additional opposition runs across 8 matches — a match-winning margin.
IPL franchises use Fielding Impact Score rankings to value fielding specialists explicitly in auction strategies — teams like Kolkata Knight Riders and Chennai Super Kings have historically assigned 10-15% of their auction budget to securing elite fielders who make measurable defensive contributions.
National cricket boards use GPS ground coverage data to design fielding fitness training programmes, setting minimum distance thresholds for each fielding position to ensure players have the athletic capacity to cover their designated zones in the field.
Television broadcast partners use fielding statistics to create 'fielding of the match' awards and real-time fielding performance overlays, showing metrics like catch completion rate and boundary saves as running totals during live broadcasts.
Cricket academies incorporate standardized fielding assessment tests — timed reaction drills, catching completion challenges, throwing accuracy stations — into their annual player evaluation frameworks, generating fielding scores that influence scholarship and development programme entry.
Wicketkeeper fielding statistics should always be analyzed separately from
Wicketkeeper fielding statistics should always be analyzed separately from outfielder statistics because wicketkeepers have categorically different opportunity profiles — they receive every delivery that passes the bat edge or takes the gloves, giving them far more catching opportunities than any outfielder but under different conditions (kneeling, wider catching arc). Professionals working with cricket fielding stats should be especially attentive to this scenario because it can lead to misleading results if not handled properly. Always verify boundary conditions and cross-check with independent methods when this case arises in practice.
Slip fielders in Test cricket have the highest-difficulty, highest-impact
Slip fielders in Test cricket have the highest-difficulty, highest-impact catching profile of any fielding position but face relatively few chances per match compared to outfielders. Their catch completion rate should be benchmarked against slip-specialist historical data, not against general fielding CCR benchmarks. Professionals working with cricket fielding stats should be especially attentive to this scenario because it can lead to misleading results if not handled properly. Always verify boundary conditions and cross-check with independent methods when this case arises in practice.
In day-night matches, fielding statistics are affected by the transition from
In day-night matches, fielding statistics are affected by the transition from natural to artificial light, which impairs depth perception and makes high catches more difficult to judge in the 20-30 minute twilight period. Fielding teams often adjust positions during this window, and analytical benchmarks should account for the artificially elevated drop rate during twilight.
| Metric | Elite (Top 10%) | Good (Top 25%) | Average | Below Average | Unit |
|---|---|---|---|---|---|
| Catch Completion Rate | 90%+ | 85-90% | 75-84% | <75% | Percentage |
| Catches per Match (Outfielder) | 0.55+ | 0.40-0.55 | 0.25-0.40 | <0.25 | Per match |
| Direct Run-Outs per 10 matches | 1.5+ | 0.8-1.5 | 0.3-0.8 | <0.3 | Per 10 matches |
| Boundary Saves per Match | 2.5+ | 1.5-2.5 | 0.8-1.5 | <0.8 | Per match |
| Distance Covered (GPS) | 1100m+ | 900-1100m | 700-900m | <700m | Metres per match |
| Wicketkeeper CCR | 95%+ | 90-95% | 83-90% | <83% | Percentage |
| Stumping Rate (WK) | 0.5+ per match | 0.3-0.5 | 0.15-0.3 | <0.15 | Per match |
How are fielding statistics measured in cricket?
Modern fielding statistics are measured through ball-tracking camera systems, GPS performance trackers worn by fielders, and video analysis platforms. Key metrics include catch completion rate (catches taken vs. chances offered), run-out contributions (direct and indirect), boundary saves (interceptions at the rope), and distance covered per match. These are compiled by team analysts and technology providers like Hawk-Eye and CricViz.
What is catch completion rate in cricket?
Catch completion rate (CCR) is the percentage of fielding chances that result in a successful catch: CCR = (Catches Taken / Total Chances Offered) x 100. Elite fielders maintain career CCRs above 85%; average international fielders typically post 75-80%. CCR is more informative than raw catch counts because it accounts for the difficulty and frequency of chances offered.
What is the best fielding position in T20 cricket?
The most impactful fielding positions in T20 cricket from a run-saving perspective are: long-off and long-on (highest boundary-save frequency), square leg and fine leg (key for pull-shot boundaries), and point/cover (diagonal boundary saves from cuts and drives). The slip cordon is less relevant in T20 due to infrequent use. Ground fielders who can sprint to cut off boundaries have the highest measurable impact.
Who is the best fielder in cricket history?
Jonty Rhodes of South Africa is widely considered the greatest outfielder in cricket history, revolutionizing fielding standards in the 1990s and setting records for run-outs and diving catches that redefined what was athletically possible. In the modern era, Ravindra Jadeja and AB de Villiers are recognized as the most complete fielding packages, combining exceptional catching, throwing accuracy, and ground-fielding athleticism.
How much does good fielding affect the match outcome?
Research using IPL and international cricket data suggests that elite fielding teams save approximately 15-25 additional runs per match compared to average fielding teams. In T20 cricket where matches are won by margins of 5-15 runs in approximately 60% of cases, this fielding run-saving is equivalent to an additional batter scoring a match-winning 15-25 runs — making fielding excellence directly match-decisive.
Are fielding statistics included in ICC player rankings?
ICC player rankings for batting and bowling do not directly incorporate fielding statistics. However, fielding performance influences broader player evaluation for award purposes — the ICC fielder of the year award, various franchise player ratings systems (used in IPL auction analysis), and national selection processes all consider fielding metrics alongside batting and bowling data.
What is a direct run-out in cricket?
A direct run-out occurs when a fielder's throw directly hits the stumps while a batter is out of their crease, resulting in dismissal without any other fielder needing to collect and then break the stumps. Direct run-outs require both throwing accuracy and reading the batter's movement precisely — they are scored as the highest-difficulty fielding achievement and assigned full credit (15 points) in Fielding Impact Score systems.
전문가 팁
When evaluating fielding for T20 squad selection, weight boundary-saving ability in the positions where the batting team hits the most boundaries for your specific opposition (use ball-tracking to identify their six-zone hitting frequency), and then select your best athletic fielder for those positions. This position-specific fielding optimization can save 8-12 additional runs per match compared to random fielder placement.
알고 계셨나요?
The fastest ever run-out in recorded international cricket occurred in a 2019 IPL match when Ravindra Jadeja fielded, turned, and threw down the stumps in 1.58 seconds from a position 40 meters from the wicket. High-speed camera analysis revealed Jadeja's arm release speed was approximately 120 km/h — comparable to a medium-fast bowler's delivery speed — directed with pinpoint accuracy. This single play has become a coaching benchmark for what elite run-out technique looks like.