Cardiac Output — Fick Principle
CO = VO₂ ÷ (CaO₂ − CvO₂) ÷ 10. O₂ content in vol%, VO₂ in mL/min.
Uitgebreide gids binnenkort beschikbaar
We werken aan een uitgebreide educatieve gids voor de Cardiac Output (Fick Method). Kom binnenkort terug voor stapsgewijze uitleg, formules, praktijkvoorbeelden en deskundige tips.
Cardiac output (CO) measured by the Fick principle is the gold-standard invasive method for quantifying how much blood the heart pumps per minute. Adolph Fick proposed in 1870 that oxygen consumption equals the product of blood flow and the arteriovenous oxygen content difference — a deceptively simple idea that remains the reference standard against which all other CO measurement techniques are validated. In clinical practice the Fick method is performed during right-heart catheterisation: a pulmonary artery catheter samples mixed venous blood from the pulmonary artery while arterial blood is drawn simultaneously, and oxygen consumption is either measured by metabolic cart (direct Fick) or estimated by a nomogram (assumed Fick). Cardiac output is then expressed in litres per minute, with a normal range of 4–8 L/min in adults at rest. Because CO varies with body size, cardiac index (CI = CO / BSA) is preferred for comparisons between patients, with a normal CI of 2.5–4.0 L/min/m². Low CO states — cardiogenic shock, severe heart failure, cardiac tamponade — are recognised when CI falls below 2.2 L/min/m². High output states including sepsis, anaemia, thyrotoxicosis, and hepatic failure can push CO above 8 L/min. The Fick principle also underpins pulmonary blood flow calculations in congenital heart disease, where left-to-right shunts are quantified as the ratio Qp/Qs using oxygen saturations from multiple chambers.
CO (L/min) = VO2 (mL/min) / ([CaO2 - CvO2] x 10). This formula calculates cardiac output fick by relating the input variables through their mathematical relationship. Each component represents a measurable quantity that can be independently verified.
- 1Measure or estimate oxygen consumption (VO2): direct measurement via metabolic cart is most accurate; assumed Fick uses 125 mL/min/m2 x BSA as an estimate.
- 2Sample arterial oxygen content (CaO2): CaO2 = (Hb x 1.34 x SaO2) + (0.0031 x PaO2), typically 18–20 mL/dL in healthy adults.
- 3Sample mixed venous oxygen content (CvO2) from pulmonary artery: CvO2 = (Hb x 1.34 x SvO2) + (0.0031 x PvO2), normally 13–15 mL/dL.
- 4Calculate the arteriovenous oxygen content difference (CaO2 - CvO2), normally 4–6 mL/dL; wider difference indicates low output.
- 5Apply the Fick equation: CO = VO2 / (CaO2 - CvO2) x 10 — the factor of 10 converts dL to mL (since VO2 is in mL/min and content is in mL/dL).
- 6Calculate cardiac index: CI = CO / BSA (BSA by DuBois: 0.007184 x height(cm)^0.725 x weight(kg)^0.425); CI < 2.2 L/min/m2 defines low-output state.
- 7Interpret in context: CO alone is insufficient — compare with filling pressures (PCWP), SVR, and mixed venous saturation (ScvO2 or SvO2) for full haemodynamic profiling.
Normal CO; CI approximately 2.7 L/min/m2 for average adult BSA of 1.85 m2
Arteriovenous difference of 5 mL/dL is in the normal range. The heart is delivering adequate oxygen to tissues.
Severely reduced CO. CI approx 1.1 L/min/m2 — profound cardiogenic shock requiring urgent intervention.
Wide AV difference (10 mL/dL) reflects maximal oxygen extraction by tissues compensating for low delivery. Classic in acute MI with pump failure.
High-output state with narrow AV difference — typical of distributive shock (sepsis, anaphylaxis).
Peripheral vasodilation reduces oxygen extraction efficiency, producing a narrow arteriovenous difference despite elevated CO.
Shunt ratio > 1.5 generally warrants repair consideration in ASD/VSD.
The Fick principle applied across both pulmonary and systemic circulations allows quantification of intracardiac shunts without contrast.
Haemodynamic assessment during right-heart catheterisation for heart failure, pulmonary hypertension, and valvular disease workup. This application is commonly used by professionals who need precise quantitative analysis to support decision-making, budgeting, and strategic planning in their respective fields
Guiding vasopressor, inotrope, and mechanical circulatory support therapy in cardiogenic shock in the cardiac ICU. Industry practitioners rely on this calculation to benchmark performance, compare alternatives, and ensure compliance with established standards and regulatory requirements
Quantifying intracardiac shunts (Qp/Qs) in adult congenital heart disease prior to intervention. Academic researchers and students use this computation to validate theoretical models, complete coursework assignments, and develop deeper understanding of the underlying mathematical principles
Pre-operative risk stratification and post-operative monitoring after cardiac surgery. Financial analysts and planners incorporate this calculation into their workflow to produce accurate forecasts, evaluate risk scenarios, and present data-driven recommendations to stakeholders
Evaluating cardiac transplant candidacy and timing of advanced heart failure therapies (LVAD, transplantation). This application is commonly used by professionals who need precise quantitative analysis to support decision-making, budgeting, and strategic planning in their respective fields
Tricuspid Regurgitation
{'title': 'Tricuspid Regurgitation', 'body': 'Severe TR causes recirculation of blood in the right heart, producing falsely elevated mixed venous saturations in the pulmonary artery sample. Fick CO will be overestimated. Thermodilution CO is also unreliable in severe TR. Clinical context and echocardiographic data become essential.'} When encountering this scenario in cardiac output fick calculations, users should verify that their input values fall within the expected range for the formula to produce meaningful results. Out-of-range inputs can lead to mathematically valid but practically meaningless outputs that do not reflect real-world conditions.
Left-to-Right Intracardiac Shunts
{'title': 'Left-to-Right Intracardiac Shunts', 'body': "In ASD or VSD, oxygenated blood from the left heart enters the right heart, inflating the mixed venous saturation. A 'step-up' of >7% O2 saturation between the SVC and pulmonary artery suggests a left-to-right shunt. In these cases, systemic and pulmonary Fick CO are calculated separately and the ratio Qp/Qs quantifies shunt magnitude."}
Anaemia
In anaemia (Hb 7 g/dL), O2-carrying capacity is halved; the same CO delivers far less oxygen. Oxygen delivery (DO2 = CO x CaO2 x 10) and oxygen consumption together better characterise tissue oxygenation than CO alone.'} In the context of cardiac output fick, this special case requires careful interpretation because standard assumptions may not hold. Users should cross-reference results with domain expertise and consider consulting additional references or tools to validate the output under these atypical conditions.
Assumed Fick Error in Obesity
{'title': 'Assumed Fick Error in Obesity', 'body': 'The standard VO2 estimate (125 mL/min/m2 x BSA) underestimates true VO2 in obese patients because adipose tissue is metabolically less active per unit surface area. Using an uncorrected assumed VO2 overestimates CO. Direct metabolic measurement is strongly preferred in patients with BMI > 35.'}
Pacemaker-Dependent Patients
{'title': 'Pacemaker-Dependent Patients', 'body': 'In patients with complete heart block on ventricular pacing, CO can vary with the AV synchrony achieved. Fick CO measured during ventricular-only pacing may underestimate the haemodynamic benefit of restoring AV synchrony. Measurement should be taken at the target pacing mode.'} This edge case frequently arises in professional applications of cardiac output fick where boundary conditions or extreme values are involved. Practitioners should document when this situation occurs and consider whether alternative calculation methods or adjustment factors are more appropriate for their specific use case.
| Profile | CI (L/min/m2) | PCWP (mmHg) | Clinical Picture | Intervention |
|---|---|---|---|---|
| Normal | >2.2 | <18 | Euvolaemic, compensated | Optimise outpatient therapy |
| Wet & Warm (Congested) | >2.2 | >18 | Fluid overload, preserved output | Diuresis, vasodilators |
| Cold & Dry (Low volume) | <2.2 | <18 | Hypovolaemia or RV failure | Cautious fluid challenge |
| Cold & Wet (Shock) | <2.2 | >18 | Cardiogenic shock | Inotropes, mechanical support |
| High Output | >8.0 | variable | Sepsis, thyrotoxicosis, anaemia | Treat underlying cause |
What is the Fick principle and why is it used for cardiac output?
The Fick principle states that the amount of a substance taken up or released by an organ equals the blood flow through that organ multiplied by the difference in concentration of that substance between arterial and venous blood. Oxygen is the ideal marker because it is consumed predictably by the body, allowing precise calculation of cardiac output from VO2 and the arteriovenous oxygen content difference.
What is the difference between direct Fick and assumed Fick?
Direct Fick measures VO2 precisely using a metabolic cart (expired gas analysis), giving the most accurate CO. Assumed Fick estimates VO2 from a formula (commonly 125 mL/min/m2 x BSA, or 3 mL/kg/min), introducing up to 25% error. Assumed Fick is used when a metabolic cart is unavailable, but results must be interpreted with this limitation in mind.
What is a normal cardiac index and why is it preferred over cardiac output?
Normal cardiac index (CI) is 2.5–4.0 L/min/m2. CI is preferred because it normalises CO for body size, making comparisons between patients of different stature meaningful. A CO of 4 L/min may be normal in a small woman but inadequate for a large man. CI < 2.2 L/min/m2 defines haemodynamic compromise regardless of body size.
Why does the formula multiply by 10?
VO2 is expressed in mL/min while CaO2 and CvO2 are expressed in mL/dL (mL per 100 mL blood). Dividing mL/min by mL/dL gives dL/min. Multiplying by 10 converts dL/min to mL/min… wait — it converts the CO from dL/min to L/min because 10 dL = 1 L. This unit reconciliation is essential for correct calculation.
What does a wide arteriovenous oxygen difference indicate?
A wide AV O2 difference (>6 mL/dL) indicates that tissues are extracting an unusually large fraction of delivered oxygen, which is a compensatory response to reduced cardiac output. This is the haemodynamic fingerprint of cardiogenic shock or low-output heart failure. Conversely, a narrow AV difference suggests high CO (sepsis) or impaired oxygen utilisation at the cellular level.
Can the Fick principle be used in patients with significant valvular regurgitation?
Fick CO represents net forward cardiac output (the blood actually delivered to systemic tissues). In severe aortic or mitral regurgitation, the total stroke volume is higher than net forward flow, so echocardiographic volumetric methods may give a higher number. For haemodynamic management, the Fick-derived forward CO is actually the most clinically relevant figure.
What is mixed venous oxygen saturation (SvO2) and what does it tell us?
SvO2 is the oxygen saturation of blood in the pulmonary artery, representing the average of venous return from all body tissues. Normal SvO2 is 65–75%. SvO2 < 60% indicates either increased oxygen demand or decreased delivery (low CO, anaemia, or low SaO2). SvO2 > 80% in shock suggests impaired oxygen utilisation (late sepsis) or a left-to-right shunt contaminating the pulmonary artery sample.
How is cardiac output measured non-invasively as an alternative to Fick?
Non-invasive alternatives include thermodilution via pulmonary artery catheter (requires only a bolus injection, not blood sampling), transthoracic echocardiography (LVOT VTI x area), bioreactance, pulse contour analysis (PiCCO, LiDCO), and estimated Fick using pulse oximetry SpO2. Each has specific error characteristics; the direct Fick remains the gold standard for validation of all other methods.
Pro Tip
In the catheterisation lab, always cross-check Fick CO against thermodilution if both are measured. Discordance >15% should prompt a review of sampling technique, timing (ensure steady state), or exclusion of a shunt. In stable outpatients, a resting Fick CO within normal range does not exclude exercise-induced haemodynamic compromise — exercise right-heart catheterisation may be needed.
Wist je dat?
Adolph Fick published his principle in 1870 in a single 29-line letter — no patient data, just a thought experiment. It took another 20 years before Grehant and Quinquaud confirmed it experimentally in animals, and nearly 50 years before it was applied to humans in vivo by Krogh and Lindhard in 1912.
Referenties
- ›Fick A. Uber die Messung des Blutquantums in den Herzventrikeln (1870)
- ›Nishimura RA et al. 2012 ACC/AHA Guidelines for the Management of Patients with Valvular Heart Disease (Catheterisation section)
- ›Ragosta M. Textbook of Clinical Hemodynamics, 2nd ed. Elsevier 2017
- ›Hoeper MM et al. Definitions and Diagnosis of Pulmonary Hypertension. JACC 2013
- ›Magder S. The Meaning of Cardiac Output. Crit Care 2020