Detaljert guide kommer snart
Vi jobber med en omfattende veiledning for Burn Rate Calculator. Kom tilbake snart for trinnvise forklaringer, formler, eksempler fra virkeligheten og eksperttips.
Burn rate is the rate at which a startup consumes its cash reserves before generating positive cash flow. It is typically expressed in dollars per month and is one of the fundamental financial metrics for any pre-profitability company. Investors, boards, and founders use burn rate alongside cash balance to calculate runway and assess financial health. Burn rate has two key definitions. Gross burn rate is the total monthly cash expenditure — everything the company spends, regardless of revenue. Net burn rate is gross burn minus monthly revenue — the actual net cash consumed each month. For a startup spending $200,000/month with $40,000 in monthly revenue, gross burn is $200,000 and net burn is $160,000. As revenue grows, net burn declines even if gross burn increases. The composition of burn rate reveals the health and efficiency of a startup. A well-managed early-stage startup allocates roughly 60-80% of burn to engineering and product (salaries of developers and designers), 10-20% to sales and marketing, and 10-15% to general and administrative costs. A startup with 40% of burn going to sales and marketing before establishing product-market fit is likely premature in scaling. Conversely, a startup with 80% burn on G&A (general and administrative) is likely over-administratively loaded. Burn rate benchmarks vary significantly by stage and sector. According to data from First Round Capital and Bessemer Venture Partners, post-seed startups typically burn $50,000-$150,000/month, post-Series A startups burn $200,000-$600,000/month, and post-Series B startups burn $600,000-$2,000,000/month. These are medians — individual companies vary widely based on geography (SF/NY are higher cost), sector (biotech burns faster than SaaS), and growth ambition. Managing burn rate requires balancing two competing imperatives: burning fast enough to hire the team, build the product, and grow the customer base needed to reach the next milestone, while burning slowly enough to maintain adequate runway for the inevitable fundraising process and unexpected setbacks. The ideal burn rate is the minimum necessary to hit the next milestone — not as low as possible, and not as high as possible.
See calculator interface for applicable formulas and inputs. This formula calculates burn rate calc by relating the input variables through their mathematical relationship. Each component represents a measurable quantity that can be independently verified.
- 1List all monthly cash expenses by category: salaries and contractor fees, rent and facilities, cloud infrastructure, software subscriptions, marketing and advertising, travel, legal and accounting, and any other operating costs.
- 2Sum all expense categories to get gross monthly burn rate.
- 3Subtract average monthly revenue from gross burn to get net burn rate.
- 4Track burn rate month-over-month to identify trends — is net burn increasing (scaling), decreasing (growing into profitability), or stable?
- 5Break down burn by department (engineering, sales, marketing, G&A) to identify inefficiencies and benchmark allocation ratios against stage-appropriate norms.
- 6Model burn rate impact of planned changes: each new hire's fully loaded cost (salary x 1.25-1.35 burden), new vendor contracts, or marketing campaign budgets.
- 7Calculate the burn multiple: net burn / net new ARR added in the same period; a burn multiple below 1.5x is considered efficient; above 2x indicates capital inefficiency.
Revenue covers 15.6% of gross burn; burn multiple = $65,000 net burn / $12,000 MRR = 5.4x (high but typical at seed).
This 5-person team has a lean burn profile with salaries ($65,000) comprising 84% of gross burn — normal for an early-stage team where the product is entirely human capital. Cloud infrastructure ($3,500) is appropriate for early-stage SaaS. The $5,000 marketing budget is modest, reflecting the team's focus on product over distribution at this stage. With $12,000 MRR against $77,000 gross burn, net burn is $65,000. Burn multiple (net burn / net new ARR) at 5.4x is high but typical for seed stage — investors expect this ratio to improve dramatically as the company scales. At $50,000 MRR, net burn would fall to $27,000 and the burn multiple to 0.54x, signaling strong capital efficiency.
Burn multiple: $335,000 / ($95,000 - $70,000 prev MRR) = 13.4x — aggressive scaling phase.
Post-Series A, this company is in aggressive scaling mode. Gross burn of $430,000 is anchored by a growing team (salaries $280,000 = 26 employees at ~$130K average fully loaded). Marketing ($75,000 = 17% of gross burn) is at the high end, reflecting the go-to-market push funded by Series A capital. G&A ($22,000 = 5% of gross burn) is appropriately lean. Revenue of $95,000 MRR growing rapidly reduces net burn to $335,000. If MRR grew from $70,000 last month to $95,000 ($25,000 net new MRR), burn multiple is $335,000 / $25,000 = 13.4x — high but expected for rapid scaling. A well-performing Series A SaaS company targets burn multiple below 2x at $2-5M ARR.
Hardware startups burn 3-5x faster than equivalent SaaS startups due to physical production costs.
Hardware startups face fundamentally higher burn rates than software companies because of physical production costs. At $375,000/month, this startup requires substantially more capital than an equivalent-stage SaaS company. Contract manufacturing alone ($120,000/month = 32% of burn) is a cost category that simply does not exist in software. R&D materials ($35,000) further inflate the burn. This startup would need a $10M+ seed or Series A to have the recommended 24 months of runway. Hardware burn rates also tend to be lumpy — prototype build phases may spike to $600,000/month while inter-milestone periods might drop to $200,000. Investors in hardware startups apply an additional buffer to runway estimates to account for this variability.
Burn reduction = 8 x $12,500 = $100,000/month; payback period of severance cost = 0.8 months.
A layoff of 8 employees reduces burn by $100,000/month ($8 x $12,500 fully loaded monthly cost) from $420,000 to $320,000. The one-time severance cost of $80,000 (averaging $10,000 per employee) is recovered in less than 1 month of savings, making the financial case straightforward. The $80,000 severance in month 1 is offset by the $100,000 burn reduction beginning in month 2, for a net $20,000 savings in the first full month. Over 12 months, the total savings are ($100,000 x 12) - $80,000 = $1,120,000 — significantly extending runway. This analysis shows why, while painful, layoffs that reset burn to a sustainable level are often the correct financial decision for a startup facing a runway crisis.
Monthly board reporting and investor updates — This application is commonly used by professionals who need precise quantitative analysis to support decision-making, budgeting, and strategic planning in their respective fields
Fundraising preparation: presenting burn rate and efficiency metrics to investors. Industry practitioners rely on this calculation to benchmark performance, compare alternatives, and ensure compliance with established standards and regulatory requirements
Hiring plan approval: modeling each incremental hire's impact on runway. Academic researchers and students use this computation to validate theoretical models, complete coursework assignments, and develop deeper understanding of the underlying mathematical principles
Annual budget setting and headcount planning — Financial analysts and planners incorporate this calculation into their workflow to produce accurate forecasts, evaluate risk scenarios, and present data-driven recommendations to stakeholders
Financial modeling for board-level scenario analysis — This application is commonly used by professionals who need precise quantitative analysis to support decision-making, budgeting, and strategic planning in their respective fields
In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in burn rate calculator calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.
In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in burn rate calculator calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.
In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in burn rate calculator calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.
| Stage | Team Size | Typical Monthly Burn | Burn Multiple Target | Key Expense |
|---|---|---|---|---|
| Pre-Seed | 1-3 people | $10,000-$40,000 | N/A (pre-revenue) | Founders' salaries |
| Seed | 4-10 people | $50,000-$150,000 | < 5x (early) | Engineering salaries |
| Series A | 10-30 people | $200,000-$600,000 | < 2.5x | Sales + engineering |
| Series B | 30-100 people | $600,000-$2,000,000 | < 1.5x | GTM + infrastructure |
| Series C+ | 100+ people | $2,000,000+ | < 1.0x (path to profit) | Full organizational scale |
| Good Burn Multiple | Any | Any | < 1.0x = excellent | Net Burn / Net New ARR |
What is a good burn rate for a startup?
There is no universally good burn rate — the right burn rate is the one that allows a startup to reach its next milestone with 3-4 months of safety buffer remaining. According to YC and Bessemer benchmarks, post-seed startups typically burn $50,000-$150,000/month; post-Series A startups $200,000-$600,000/month. What matters more than the absolute number is the burn multiple (net burn / net new ARR), capital efficiency ratio, and whether the burn is producing proportional progress toward milestones. A startup burning $500,000/month that is growing ARR by $200,000/month has a burn multiple of 2.5x — acceptable for early growth stage. A startup burning the same with $30,000/month ARR growth has a burn multiple of 16.7x — inefficient and unsustainable.
What is the burn multiple and why does it matter?
The burn multiple, popularized by David Sacks (Craft Ventures), measures capital efficiency: Net Burn Rate / Net New ARR Added in the same period. A burn multiple of 1.0x means the startup spends $1 in net burn for every $1 of new ARR added — excellent. Below 1.5x is very good; 1.5-2.0x is good; 2.0-3.0x is acceptable for early stages; above 3.0x signals potential inefficiency. Investors increasingly use the burn multiple alongside revenue growth rate to evaluate Series B+ companies. A company growing 3x year-over-year with a 1.5x burn multiple is a far better capital deployment than one growing 50% with a 4.0x burn multiple. David Sacks described the burn multiple as the single best predictor of Series A investor interest at seed stage.
How should a startup reduce its burn rate?
Burn rate reduction strategies fall into fast and slow levers. Fast levers (impact within 30-60 days): eliminate contractor and consulting relationships, cut discretionary marketing spend, freeze non-critical hiring, renegotiate software subscriptions, and eliminate perks (office snacks, events). Medium levers (60-90 days): reduce office space or move to remote-first, renegotiate major vendor contracts, defer non-critical features reducing infrastructure costs, and negotiate extended payment terms with suppliers. Slow levers (3+ months, painful but high impact): headcount reductions (salaries are typically 60-80% of burn). The fastest, highest-impact levers are always headcount-related, but they are also the most disruptive to company culture and product delivery.
How does fundraising affect burn rate?
Fundraising directly enables increased burn by providing the capital to fund hiring, marketing, and infrastructure expansion. The relationship between round size and appropriate burn increase is often misunderstood: raising $5M should enable increased burn only to the extent it produces proportional progress toward the milestones needed for the next round. If a $5M Series A enables a team to grow from $200,000 to $1M ARR in 18 months (with a burn of $300,000/month = $5.4M total), that is efficient capital deployment. If the same $5M produces only $300,000 ARR growth at the same burn, that is a capital efficiency problem that will make the Series B significantly harder to raise.
What is the relationship between burn rate and valuation?
Burn rate affects valuation through the burn multiple and capital efficiency metrics. Investors in high-growth startups value companies on revenue multiples (e.g., 5-10x ARR for SaaS Series A companies), but they discount valuations for high burn multiples because capital-inefficient companies require more future capital to reach profitability — diluting future investors. A startup with $2M ARR growing 200% year-over-year but a burn multiple of 8x will receive a lower valuation than a comparable startup with a 2x burn multiple, because the first company will require significantly more capital at worse terms to reach profitability. Efficient capital deployment (low burn multiple, high growth rate) is one of the highest-value signals a startup can demonstrate to investors.
How is burn rate different for B2B vs. B2C startups?
B2B SaaS startups typically have more predictable, subscription-based revenue that reduces net burn quickly and clearly. Their burn tends to be dominated by engineering, sales (enterprise sales cycles are expensive), and customer success. B2C startups often have more variable revenue (transaction-based or advertising) and much higher marketing spend as a percentage of burn, because user acquisition at consumer scale requires massive marketing investment. B2C burn rates can spike dramatically around campaigns and seasonal events. B2C startups also face higher volatility in their revenue-to-burn relationship, making runway calculations inherently less certain than B2B models.
Should startups aim for zero burn (profitability)?
Not necessarily during the high-growth phase. Most venture-backed startups prioritize growth over profitability during their early stages because the expected future value of market share captured with investor capital exceeds the cost of capital. The calculus changes as the company matures: at Series C+, investors increasingly want to see a clear path to profitability, and public markets (for IPO-bound companies) demand actual profitability or a concrete timeline. The SaaS Rule of 40 — where revenue growth rate + profit margin should exceed 40% — provides a balanced benchmark for mature startups. A company growing 80% year-over-year with a -40% profit margin is in the healthy zone; one growing 20% with a -40% margin needs to either accelerate growth or cut burn significantly.
Pro Tips
Break down your burn rate into fixed costs (salaries, rent, subscriptions) and variable costs (marketing, travel, contractors) — fixed costs set the floor below which you cannot go quickly; variable costs are the fastest levers to pull in a cash crisis.
Visste du?
According to CB Insights, 38% of startups fail because they ran out of cash or failed to raise new capital. The average burn rate for a Series A startup with 10 employees is $150,000-$250,000 per month — making careful burn rate management one of the most important survival skills for early-stage founders.