Detaljerad guide kommer snart
Vi arbetar på en omfattande utbildningsguide för Reverb Decay Calculator. Kom tillbaka snart för steg-för-steg-förklaringar, formler, verkliga exempel och experttips.
The Reverb Decay / RT60 Calculator computes the reverberation time RT60 of an acoustic space — the time it takes for sound pressure to decay by 60 decibels (dB) after a sound source stops. RT60 is the standard international metric for characterizing room acoustics, defined in ISO 3382 (Acoustics — Measurement of Room Acoustic Parameters). A longer RT60 means sound lingers in the space longer; a shorter RT60 means it dies away quickly. Different spaces and uses demand very different RT60 values: a concert hall designed for orchestral music typically has RT60 of 1.8–2.2 seconds, a cathedral or large church can exceed 5–8 seconds, a recording studio control room aims for 0.2–0.3 seconds (very dry), and a broadcast studio or podcast booth targets 0.15–0.25 seconds. The Sabine formula, developed by Wallace Clement Sabine (the father of architectural acoustics) in 1900, relates RT60 to room volume and total acoustic absorption. The Eyring-Norris formula provides more accurate results for highly absorptive rooms where average absorption coefficients exceed 0.2. The absorption coefficient of a surface (ranging from 0 for perfectly reflective to 1 for perfectly absorptive) depends on the material and frequency. Common materials like concrete and glass are highly reflective (low absorption), while acoustic foam, carpet, and heavy curtains are highly absorptive (high absorption coefficients). This calculator is essential for acoustic consultants, recording studio designers, venue architects, and home studio builders planning acoustic treatment strategies.
Sabine Formula: RT60 = 0.161 × V / A where V = room volume (m³), A = total absorption (Sabins) = Σ(surface area × absorption coefficient) Eyring Formula: RT60 = 0.161 × V / (-S × ln(1 - α_avg)) where S = total surface area, α_avg = average absorption coefficient
- 1Step 1: Measure room dimensions (length × width × height) and calculate volume V = L × W × H.
- 2Step 2: Identify all surfaces (floor, ceiling, walls, windows, doors) and their areas.
- 3Step 3: Look up the absorption coefficient for each surface material at the frequency of interest (usually 500 Hz for general RT60).
- 4Step 4: Calculate absorption for each surface: A_i = area × coefficient.
- 5Step 5: Sum all absorption values: A_total = ΣA_i.
- 6Step 6: Apply Sabine formula: RT60 = 0.161 × V / A_total.
- 7Step 7: For rooms with high absorption (α_avg > 0.2), use the Eyring formula for better accuracy.
- 8Step 8: Compare calculated RT60 to target value for intended use and plan additional treatment if needed.
V = 30 m³. Total surface area ≈ 59 m². Absorption ≈ 59 × 0.05 = 2.95 Sabins. RT60 = 0.161 × 30 / 2.95 = 1.64 s. Wait — adding carpet, sofa, and curtains might bring this to ~0.5s, still too live for a mix room.
A = 0.161 × 15,000 / 2.0 = 1,207.5 Sabins. With 4,000 m² of surface area, average absorption coefficient needed = 1,207.5 / 4,000 = 0.30, achievable with upholstered seating, carpet aisles, and acoustic panels.
V = 84 m³. Required A = 0.161 × 84 / 0.25 = 54.07 Sabins. With ~112 m² surface area, average α needed = 0.48 — requires combination of absorption panels, bass traps, and diffusion.
Current A = 0.161×50/1.2 = 6.7 Sabins. Target A = 0.161×50/0.4 = 20.1 Sabins. Difference = 13.4 Sabins. This could be achieved with approximately 13–14 m² of 2-inch acoustic foam panels (α ≈ 0.9 at 1kHz).
Acoustic design for recording studios and control rooms, representing an important application area for the Reverb Decay Calc in professional and analytical contexts where accurate reverb decay calculations directly support informed decision-making, strategic planning, and performance optimization
Concert hall and performance venue architecture, representing an important application area for the Reverb Decay Calc in professional and analytical contexts where accurate reverb decay calculations directly support informed decision-making, strategic planning, and performance optimization
Acoustic treatment specification for broadcast studios, representing an important application area for the Reverb Decay Calc in professional and analytical contexts where accurate reverb decay calculations directly support informed decision-making, strategic planning, and performance optimization
Podcast and YouTube creator room optimization, representing an important application area for the Reverb Decay Calc in professional and analytical contexts where accurate reverb decay calculations directly support informed decision-making, strategic planning, and performance optimization
Classroom acoustic design for speech intelligibility, representing an important application area for the Reverb Decay Calc in professional and analytical contexts where accurate reverb decay calculations directly support informed decision-making, strategic planning, and performance optimization
Frequency-Dependent RT60
A flat RT60 curve (equal decay at all frequencies) is ideal for critical listening. Most rooms have longer RT60 at bass frequencies and shorter at treble. Bass trap placement in corners (maximum pressure zones) is the most effective way to reduce excessive low-frequency reverberation.'}
Eyring Formula', 'body': "For rooms with average absorption coefficient above 0.2, Sabine's formula overestimates RT60 and the Eyring formula should be used. For lightly treated rooms (α < 0.1), both formulas give similar results."}. In the Reverb Decay Calc, this scenario requires additional caution when interpreting reverb decay results. The standard formula may not fully account for all factors present in this edge case, and supplementary analysis or expert consultation may be warranted. Professional best practice involves documenting assumptions, running sensitivity analyses, and cross-referencing results with alternative methods when reverb decay calculations fall into non-standard territory.
When using the Reverb Decay Calc for comparative reverb decay analysis across
When using the Reverb Decay Calc for comparative reverb decay analysis across scenarios, consistent input measurement methodology is essential. Variations in how reverb decay inputs are measured, estimated, or rounded introduce systematic biases compounding through the calculation. For meaningful reverb decay comparisons, establish standardized measurement protocols, document assumptions, and consider whether result differences reflect genuine variations or measurement artifacts. Cross-validation against independent data sources strengthens confidence in comparative findings.
| Room Type | Target RT60 | Primary Frequency | Key Treatment |
|---|---|---|---|
| Anechoic Chamber | <0.05 s | All frequencies | 100% absorption (wedges) |
| Pro Control Room | 0.2–0.35 s | 500 Hz | Absorption + diffusion |
| Vocal Booth | 0.15–0.25 s | 500 Hz | Heavy absorption |
| Home Studio | 0.3–0.5 s | 500 Hz | Panels + bass traps |
| Podcast/Broadcast | 0.2–0.3 s | 500 Hz | Absorption panels |
| Recording Live Room | 0.4–0.8 s | 500 Hz | Variable treatment |
| Small Concert Hall | 1.2–1.6 s | Mid-frequency | Seating, carpets, panels |
| Symphonic Concert Hall | 1.8–2.2 s | Mid-frequency | Reflective surfaces, volume |
| Opera House | 1.2–1.6 s | Mid-frequency | Balances diction and reverb |
| Cathedral/Church | 3.0–8.0+ s | Mid-low frequency | Hard stone/marble surfaces |
What is the optimal RT60 for a recording studio?
The optimal RT60 depends on the specific room purpose. A recording studio's live room (where instruments and vocals are recorded) typically targets 0.4–0.8 seconds for a balanced, warm acoustic with some natural ambiance. The control room (where mixing takes place) aims for 0.2–0.35 seconds at mid-high frequencies to ensure mix accuracy. Isolation booths and vocal booths target very short RTs of 0.15–0.25 seconds for a dry, intimate sound. Master control rooms in top mastering facilities are often treated to achieve nearly flat frequency-dependent RT60 curves.
What is a Sabin in acoustic measurement?
A Sabin (named after Wallace Clement Sabine) is the unit of acoustic absorption. One Sabin represents the absorption equivalent of 1 square meter (metric Sabin) of a perfectly absorptive surface (absorption coefficient = 1). A material with an absorption coefficient of 0.5 and an area of 10 m² contributes 5 Sabins to the room's total absorption. Open windows have an absorption coefficient of approximately 1.0 because sound escapes through them and does not return.
How do absorption coefficients vary with frequency?
Absorption coefficients are highly frequency-dependent. Most common materials absorb mid and high frequencies (500 Hz and above) well but absorb bass frequencies (below 200 Hz) very poorly. This is why untreated rooms often have boomy, undefined bass — the low frequencies reflect many times before losing energy while high frequencies die away quickly. Bass traps (thick absorptive materials or resonant panel absorbers) are specifically designed to absorb low-frequency energy that standard foam panels cannot address.
What is the difference between RT60 and early decay time (EDT)?
RT60 is measured from the moment a sound stops until it has decayed by 60 dB. Early decay time (EDT) measures the initial 10 dB of decay and multiplies by 6 to extrapolate an equivalent full decay time. EDT is often a better predictor of perceived reverb quality because the listener's auditory system is most sensitive to the earliest reflections. In a well-designed concert hall, EDT should closely match RT60. In a poorly designed room with strong early reflections, EDT may be much shorter than RT60.
How does room shape affect RT60 and reverb quality?
Room shape affects not just RT60 but the distribution of reflections over time. A parallel-walled rectangular room (like most bedrooms and studios) creates strong flutter echoes — rapid, repeating reflections between parallel surfaces. Non-parallel walls, angled ceilings, and irregular room shapes (like the classic 'non-environment' control room design) break up flutter echoes and produce more diffuse, natural-sounding reverberation even at the same RT60 value.
What is diffusion and how does it differ from absorption?
Absorption reduces sound energy by converting it to heat in porous materials or by using resonant structures. Diffusion scatters sound energy in multiple directions without significantly reducing its total amount. Diffusers (like QRD — Quadratic Residue Diffusers) randomize the angles of reflection, breaking up discrete echoes into a more even, spatially pleasing reverb tail. A mix of absorption and diffusion is ideal for most acoustic environments — too much absorption makes a room acoustically 'dead' and claustrophobic.
How can I measure RT60 in my own room?
RT60 can be measured with a smartphone app using the impulse response method. Apps like Room EQ Wizard (REW) for PC or iOS/Android apps measure RT60 by recording the decay of a calibrated impulse (a hand clap, starting pistol, or swept sine test signal) using a measurement microphone. REW (free software) used with a USB measurement microphone ($50–$150) provides professional-quality RT60 measurements across multiple frequency bands, giving you a detailed picture of your room's acoustic behavior.
Can adding too much acoustic treatment be harmful?
Yes. Over-damped rooms — where RT60 is extremely short across all frequencies — sound unnatural and uncomfortable. Human hearing is accustomed to some degree of ambiance from room acoustics. A room with RT60 well below 0.2 seconds at all frequencies produces listener fatigue and a disconcerting 'dead' quality. The goal for most studio and listening environments is controlled reverb with a frequency-balanced decay, not zero reverb. Diffusion is important for maintaining spaciousness in highly treated rooms.
Proffstips
For a home studio, prioritize bass trap corners first (they address the most common problem — excess low-frequency reverb), then add broadband absorption at the primary reflection points (first reflections from speakers to ears via walls and ceiling), and finally add diffusion on the rear wall to maintain a sense of space.
Visste du?
Wallace Clement Sabine discovered the relationship between room volume and reverberation time in 1900 while investigating the disastrous acoustics of the lecture hall at Harvard's Fogg Art Museum. He borrowed cushions from Sanders Theatre to experimentally add absorption, measured decay times with a stopwatch and a pipe organ, and empirically derived what became the Sabine formula — the foundation of modern architectural acoustics.