Diagonal
43.3mm
Crop Factor
1×
50mm Equiv
50mm
Detaljerad guide kommer snart
Vi arbetar på en omfattande utbildningsguide för Camera Sensor Size Calculator. Kom tillbaka snart för steg-för-steg-förklaringar, formler, verkliga exempel och experttips.
The Camera Sensor Size Calculator computes key sensor parameters including physical dimensions, crop factor, diagonal, pixel pitch, sensor area, and field of view for any camera format. The camera sensor is the fundamental element determining image quality, depth of field characteristics, low-light performance, and the effective angle of view of any attached lens. Sensor size nomenclature in the camera industry is often confusing: historical names like '1-inch sensor' actually refer to a sensor measuring approximately 13.2 × 8.8mm (not 25.4mm), a legacy of vacuum tube sizing conventions. The crop factor — the ratio of the full-frame (35mm equivalent) sensor diagonal to the actual sensor diagonal — determines how a lens's field of view is translated between sensor formats. Understanding sensor size is critical for: comparing cameras across different formats (full-frame vs. APS-C vs. Micro Four Thirds vs. medium format), calculating depth of field differences between systems, understanding low-light performance differences (larger sensors generally provide better signal-to-noise ratio), selecting appropriate lenses for a given sensor format, and understanding why a 50mm lens on full-frame looks different from 50mm on APS-C. The sensor size also determines the theoretical diffraction limit and the maximum useful megapixel count before pixel pitch becomes too small for practical use. Camera sensor technology has advanced through several generations: CCD to CMOS, front-illuminated to back-side illuminated (BSI) to stacked CMOS, each improving low-light performance and dynamic range for any given physical sensor size.
Sensor Diagonal = √(Width² + Height²) Crop Factor = Full-Frame Diagonal / Sensor Diagonal = 43.267 / Sensor Diagonal Pixel Pitch (μm) = Sensor Width (mm) / Horizontal Pixels × 1000 Sensor Area = Width × Height (mm²) Aspect Ratio = Width / Height FOV Equivalent = Actual FOV × (1 / Crop Factor)
- 1Step 1: Find your camera sensor's physical dimensions (width × height in mm) from the manufacturer's specifications.
- 2Step 2: Calculate diagonal: √(W² + H²). For full-frame 36×24: √(1296+576) = √1872 = 43.27mm.
- 3Step 3: Calculate crop factor: CF = 43.267 / your_diagonal.
- 4Step 4: Calculate pixel pitch: p = sensor_width_mm / horizontal_pixel_count × 1000 μm.
- 5Step 5: Compute sensor area: W × H mm².
- 6Step 6: Compare to reference: full-frame area = 864 mm². Your sensor's light-gathering advantage = (your area / 864) — larger is better for low-light performance.
Diagonal = √(23.5²+15.6²) = 28.19mm. CF = 43.267/28.19 = 1.534×. Pixel pitch = 23.5/6250×1000 = 3.76μm. Area = 366.6mm² (42% of full-frame).
21.63mm diagonal gives exactly 2.0× crop factor. Area = 225mm² — just 26% of full-frame area, collecting correspondingly less light per equivalent composition.
CF = 43.267/67.1 = 0.645× (expansion factor — lenses appear wider than on full-frame). Area = 2169mm² = 2.5× the area of full-frame — massive light-gathering advantage.
12.2mm diagonal gives 3.54× crop. Area = 71.5mm² — just 8.3% of full-frame area. Despite 48 MP, the tiny pixel pitch (1.22μm) severely limits per-pixel light capture vs. larger sensors.
Camera buyers comparing sensor formats when choosing between system upgrades.. This application is commonly used by professionals who need precise quantitative analysis to support decision-making, budgeting, and strategic planning in their respective fields
Cinematographers specifying camera requirements for productions needing specific depth of field characteristics.. Industry practitioners rely on this calculation to benchmark performance, compare alternatives, and ensure compliance with established standards and regulatory requirements
Lens adaptor users calculating effective focal lengths and crop factors for mixed systems.. Academic researchers and students use this computation to validate theoretical models, complete coursework assignments, and develop deeper understanding of the underlying mathematical principles
Photographers understanding system transitions (APS-C to full-frame, crop to medium format).. Financial analysts and planners incorporate this calculation into their workflow to produce accurate forecasts, evaluate risk scenarios, and present data-driven recommendations to stakeholders
Dual pixel autofocus and pixel splitting
{'title': 'Dual pixel autofocus and pixel splitting', 'body': "Canon's Dual Pixel CMOS AF and Sony's Phase Detect CMOS AF place phase-detection pixels across the sensor. In Canon's implementation, each pixel site is split into two photodiodes that can be read separately for phase detection or combined for imaging. This allows fast, accurate autofocus across the entire frame without dedicating specific pixels exclusively to AF duties."}
rolling shutter', 'body': 'Rolling shutter reads the sensor row-by-row over a finite period, causing geometric distortion of fast-moving subjects or rapid camera movement. Global shutter reads all pixels simultaneously, eliminating rolling shutter effects. Global shutter sensors are standard in scientific and machine vision cameras; the Sony A9 III (2024) was the first full-frame mirrorless consumer camera with a native global shutter.'}
Negative input values may or may not be valid for camera sensor calc depending on the domain context.
Some formulas accept negative numbers (e.g., temperatures, rates of change), while others require strictly positive inputs. Users should check whether their specific scenario permits negative values before relying on the output. Professionals working with camera sensor calc should be especially attentive to this scenario because it can lead to misleading results if not handled properly. Always verify boundary conditions and cross-check with independent methods when this case arises in practice.
| Format | Dimensions (mm) | Area (mm²) | Diagonal (mm) | Crop Factor |
|---|---|---|---|---|
| Large Format 4×5" | 127 × 101.6 | 12,903 | 162.6 | 0.27× |
| Medium Format (Phase One) | 53.7 × 40.4 | 2,169 | 67.1 | 0.64× |
| Medium Format (Fuji GFX) | 43.8 × 32.9 | 1,441 | 54.8 | 0.79× |
| Full-Frame (35mm) | 36.0 × 24.0 | 864 | 43.3 | 1.0× |
| APS-H (Canon 1D) | 27.9 × 18.6 | 519 | 33.5 | 1.29× |
| APS-C (Nikon/Sony/Fuji) | 23.5 × 15.6 | 367 | 28.2 | 1.53× |
| APS-C (Canon) | 22.3 × 14.9 | 332 | 26.8 | 1.61× |
| Micro Four Thirds | 17.3 × 13.0 | 225 | 21.6 | 2.0× |
| 1-inch | 13.2 × 8.8 | 116 | 15.9 | 2.72× |
| 1/1.7-inch | 7.6 × 5.7 | 43.3 | 9.5 | 4.55× |
| 1/2.3-inch (smartphone) | 6.2 × 4.7 | 29.1 | 7.8 | 5.55× |
Why is a '1-inch' sensor not actually 25.4mm?
The '1-inch' designation is a holdover from vacuum tube vidicon camera technology of the 1950s, where the tube's outer diameter was 1 inch (25.4mm). The actual imaging area was only about half the tube's diameter. A modern '1-inch' image sensor measures approximately 13.2 × 8.8mm (16.4mm diagonal) — not 25.4mm. Other sensor size names (1/1.7-inch, 1/2.3-inch) follow the same convention and are similarly misleading if taken literally.
Does a larger sensor always produce better image quality?
Generally yes for noise, dynamic range, and depth of field versatility — but not universally. Larger sensors collect more total light per composition, improving SNR proportionally. However, a 45 MP full-frame camera using a mediocre lens may produce worse results than a 20 MP APS-C camera with an exceptional prime lens. Lens quality, sensor generation (BSI vs. front-illuminated CMOS), image processing, and pixel pitch all contribute. Sensor size is one important factor, not the only one.
How much better is full-frame than APS-C for low-light photography?
Assuming equal pixel counts and similar pixel technology, full-frame provides approximately 1–1.5 stops better high-ISO performance than APS-C, because pixels are physically larger and collect more photons. With identical pixel pitch (same technology generation), the advantage is pure sensor area: full-frame area (864mm²) / APS-C area (~366mm²) = 2.36×, which is approximately 1.24 stops advantage. In practice, the gap between current full-frame and APS-C is often just 0.7–1.3 stops.
What is a stacked sensor and how does it affect image quality?
A stacked (or layered) CMOS sensor places the pixel layer on top of a separate processing chip, connected by copper pillar bonds through the silicon. This allows much faster readout speeds (reducing rolling shutter and enabling higher burst rates) and the integration of DRAM buffers for ultra-high-speed recording. Sony's stacked sensors (A9 III uses a global shutter stacked sensor) achieve up to 120 fps full-resolution with no rolling shutter distortion — a significant advantage for sports and action photography.
How do I choose between a high-megapixel or high-ISO camera?
The choice depends on your primary use case. High-megapixel (45–100 MP) cameras excel for: studio photography, landscape/architecture (large print output), commercial product photography, and stock photography requiring maximum resolution. High-ISO optimized cameras (24 MP with best-in-class sensor) excel for: sports and action, wedding photography, photojournalism, wildlife and astrophotography, and any low-light work. Some cameras (Sony A7R V, Nikon Z8) combine high resolution with excellent high-ISO performance, but typically at premium price points.
What is back-side illumination (BSI) and why does it improve sensor performance?
In conventional front-illuminated CMOS sensors, the readout circuitry sits in front of the photodiodes, partially blocking incoming light. Back-side illuminated (BSI) sensors flip the architecture so the photodiodes face the incoming light directly, with circuitry on the back. This increases the effective light-gathering area of each pixel by 30–50% and reduces interference from internal reflections — improving sensitivity, dynamic range, and noise performance. Most modern Sony, Canon, and Nikon sensors use BSI architecture.
How does sensor size affect depth of field in practice?
For the same field of view (same framing), aperture, and shooting distance, a larger sensor always produces shallower depth of field because it requires a longer actual focal length lens to achieve the same angle of view. A 50mm f/1.8 on full-frame provides shallower DOF than a 33mm f/1.2 on APS-C (same 50mm equivalent FOV) because the actual focal length (50mm vs. 33mm) drives depth of field, not the equivalent focal length. The effective aperture for DOF comparison = actual aperture × crop factor.
Proffstips
When comparing cameras from different manufacturers, always look up the actual sensor dimensions from the manufacturer's specification sheet rather than relying on marketing format names. Sites like Sensor Sizes (sensorsizes.info) and DPReview maintain accurate databases of sensor physical dimensions for most production cameras.
Visste du?
The first commercial digital camera with a CCD sensor, the Dycam Model 1 (1990), had a sensor measuring just 375 × 240 pixels — a total of 90,000 pixels, or 0.09 megapixels. The sensor measured approximately 6 × 4mm with a pixel pitch of about 16μm — ironically, a larger pixel pitch than many modern high-resolution cameras, giving it theoretically better per-pixel light sensitivity than today's 50 MP sensors.