learn.howToCalculate
learn.whatIsHeading
Pipe Flow Rate Calculator helps contractors and tradespeople accurately size, spec, and estimate materials and systems.
Formel
Q = A × V where A = pipe cross-section area, V = fluid velocity
Steg-för-steg-guide
- 1Measure pipe diameter, estimate or measure flow velocity
- 2Apply the formula using your project measurements
- 3Add required safety factors or waste allowances per code
Lösta exempel
Ingång
2 inch pipe (A=0.0218 sf), 5 fps velocity
Resultat
Q = 0.0218 × 5 = 0.109 cfs = 49 GPM
Vanliga misstag att undvika
- ✕Not applying code-required safety factors or derating
- ✕Forgetting to account for waste and cut losses in material estimates
Redo att beräkna? Prova den kostnadsfria Pipe Flow Rate-kalkylatorn
Prova själv →