learn.howToCalculate
learn.whatIsHeading
Measures reactive vs. real power in AC circuits showing energy efficiency. Power factor <1 wastes electricity and increases utility costs.
Formel
Power factor = P ÷ S
- P
- P value — Variable used in the calculation
- S
- S value — Variable used in the calculation
Steg-för-steg-guide
- 1Real power (P) in watts
- 2Apparent power (S) in VA (volts × amps)
- 3Power factor = P ÷ S
- 4Cosine of phase angle between voltage and current
- 5Range 0-1; closer to 1 is better
Lösta exempel
Ingång
P=1000W, S=1200VA
Resultat
PF=0.833
Vanliga misstag att undvika
- ✕Assuming residential power factor matters (most don't measure)
- ✕Not measuring true power with calibrated meters
Vanliga frågor
How does low power factor increase costs?
Utilities charge penalty for PF <0.95; also increases I²R losses in distribution.
How do I improve power factor?
Add capacitors to offset inductive loads (motors, transformers) or use synchronous motors.
Redo att beräkna? Prova den kostnadsfria Power Factor-kalkylatorn
Prova själv →