learn.howToCalculate
learn.whatIsHeading
Surface roughness affects friction, wear, fatigue, and appearance. Proper specification prevents unnecessary cost or inadequate performance.
Steg-för-steg-guide
- 1Measure Ra (average roughness) in micrometers or microinches
- 2Typical values: rough (3.2-6.3 μm), normal (0.8-1.6 μm), smooth (0.05-0.2 μm)
- 3Specify based on functional requirements
Lösta exempel
Ingång
Bearing surface typically requires Ra <0.4 μm (smooth)
Resultat
Specify fine grinding or lapping
Affects bearing life
Vanliga misstag att undvika
- ✕Over-specifying finish (unnecessary cost)
- ✕Under-specifying and causing functional problems
Vanliga frågor
Why does roughness matter for bearings?
Rough surfaces cause higher friction and wear. Smooth surfaces reduce wear 10-100×.
Does fine surface finish improve fatigue strength?
Yes, polished surfaces have ~50% higher fatigue strength than rough surfaces.
Redo att beräkna? Prova den kostnadsfria Surface Roughness-kalkylatorn
Prova själv →