🎯Economy Rate Calculator
Podrobný průvodce již brzy
Pracujeme na komplexním vzdělávacím průvodci pro Cricket Economy Rate Calculator. Brzy se vraťte pro podrobné vysvětlení, vzorce, příklady z praxe a odborné tipy.
In T20 cricket's modern era, a bowler's economy rate has arguably surpassed wickets taken as the primary measure of bowling effectiveness. When Rashid Khan conceded just 448 runs in 72 T20I matches while taking 100 wickets, his economy rate of 6.17 — in a format where the global average has climbed to 8.5 runs per over — cemented his status as the most economical elite bowler in T20 history. This single metric, runs per over, encapsulates how well a bowler restricts the opposition's scoring pace, which in T20 cricket directly determines match outcomes. Economy rate is calculated simply: total runs conceded divided by total overs bowled. Despite its simplicity, it is one of the most context-dependent statistics in cricket. A bowler's economy rate in the powerplay (overs 1-6) should be evaluated differently from one in the death overs (overs 17-20) because scoring rates differ dramatically across phases. A death bowler with an economy of 9.5 may be outstanding if the average death-over economy at that ground is 11+, while a powerplay bowler with the same 9.5 economy may be extremely poor. Economy rate matters for four major constituencies. Selectors use it to identify disciplined bowlers who control scoring — especially valuable in formats where boundary prevention is a primary skill. Fantasy cricket players assign premium credit values to low-economy bowlers because their economy bonuses are predictable. Captains use it to set field placements and rotation strategies. Statisticians track career economy rates to rank all-time great bowlers, with Saqlain Mushtaq, Muttiah Muralitharan, and Rashid Khan leading the modern era's most economical performers. Limitations exist. Economy rate is highly sensitive to match format, pitch conditions, and the quality of batting faced. A bowler who plays exclusively in spin-friendly conditions will naturally post lower economy rates than one who always operates in high-scoring T20 leagues. Contextual adjustment is always necessary when comparing across eras, formats, or conditions.
Economy Rate Formula: Economy Rate (ER) = Total Runs Conceded / Total Overs Bowled Note: Overs Bowled is expressed as a decimal. E.g., 8 overs and 3 balls = 8.5 (not 8.3) Convert: Balls bowled / 6 = overs (decimal form) Worked Example: Jasprit Bumrah concedes 22 runs in 4 overs during a T20I ER = 22 / 4 = 5.50 runs per over Interpretation: Outstanding — global T20I average ER is approximately 8.2-8.5 Per-ball economy: 22 / 24 balls = 0.917 runs per ball Projected full-20-over contribution (if bowled all 20): 5.50 x 20 = 110 runs (hypothetical) Phase-Adjusted Economy: Powerplay ER = Powerplay_Runs / 6 overs Middle-overs ER = Middle_Runs / 8 overs Death ER = Death_Runs / 4 overs (T20 final 4 overs if bowling full quota)
- 1Record the total number of runs conceded by the bowler across the spell or career being analyzed, including all extras (wides and no-balls) attributable to the bowler.
- 2Convert the total balls bowled into overs by dividing by 6; partial overs are expressed as decimals (e.g., 7 balls = 1.167 overs), ensuring the denominator is accurate.
- 3Divide total runs by total overs to produce the economy rate — the number of runs conceded per complete over on average.
- 4Contextualize the result by comparing it to the phase-specific average economy rate for the match format being analyzed, not just the overall bowling average.
- 5Apply a match-conditions adjustment if needed: subtract 0.5-1.0 runs per over for bowlers operating on spin-friendly low-scoring pitches, or add similar amounts for flat batting tracks.
- 6For career economy rate, weight recent seasons more heavily than historical performance to account for changes in batting aggression and boundary frequency over time.
- 7Use economy rate in combination with strike rate (balls per wicket) to identify the ideal bowling profile: a bowler who is both economical and wicket-taking is exceptionally rare and valuable.
Rashid's career T20I economy of under 6.5 in a format where the global average is 8.2+ is statistically extraordinary. He achieves this through deceptive pace variation and a googly that even top batters find unreadable.
Bumrah's ability to restrict scoring in overs 17-20 — when batters are swinging at everything — is the defining skill of his T20 career and the primary reason for his auction premium.
An ER of 8.5 looks poor in isolation but represents average-to-slightly-below performance in T20 Blast conditions where pitches often favour batting. Context transforms how this number is interpreted.
Test cricket economy rates operate on a completely different scale (typical range 2.5-3.5) compared to T20. Murali's 2.23 across 800 wickets is a statistical outlier that may never be matched.
Team selection committees use career phase-specific economy rates as a primary filter when identifying bowlers for T20 squads, particularly for death-bowling roles where economy under pressure is the primary skill requirement.
Fantasy cricket platforms assign credit values that directly correlate with expected economy rate bonus points, making a bowler's average economy the single most influential number in pricing decisions, helping analysts produce accurate results that support strategic planning, resource allocation, and performance benchmarking across organizations
Broadcasting analytics overlays (CricViz, ICC Analytics) display live economy rate vs. match-phase average comparisons in real time, giving viewers instant contextual assessment of a bowling spell, allowing professionals to quantify outcomes systematically and compare scenarios using reliable mathematical frameworks and established formulas
Franchise T20 leagues use economy rate thresholds as key performance indicators in player contracts, with performance bonuses sometimes tied to achieving specific economy benchmarks across a tournament, supporting data-driven evaluation processes where numerical precision is essential for compliance, reporting, and optimization objectives
In a match with DLS applied, bowlers who complete overs before a rain stoppage
In a match with DLS applied, bowlers who complete overs before a rain stoppage may have their economy rate calculated on a reduced-over context, making phase-specific analysis more meaningful than raw career economy comparisons. Professionals working with cricket economy rate should be especially attentive to this scenario because it can lead to misleading results if not handled properly. Always verify boundary conditions and cross-check with independent methods when this case arises in practice.
Bowlers who exclusively bowl in favourable phases (e.g., spinners only in
Bowlers who exclusively bowl in favourable phases (e.g., spinners only in middle overs on spinning tracks) will post artificially lower economy rates than all-purpose bowlers who must operate in powerplays and death overs — phase separation is essential for fair comparison. Professionals working with cricket economy rate should be especially attentive to this scenario because it can lead to misleading results if not handled properly. Always verify boundary conditions and cross-check with independent methods when this case arises in practice.
Wides bowled in succession (e.g., during a no-ball confusion) add significantly
Wides bowled in succession (e.g., during a no-ball confusion) add significantly to runs conceded without changing overs bowled, creating statistical spikes that may not reflect the bowler's true control level. Multi-match smoothing of economy rates reduces this noise. Professionals working with cricket economy rate should be especially attentive to this scenario because it can lead to misleading results if not handled properly. Always verify boundary conditions and cross-check with independent methods when this case arises in practice.
| Bowler | Country | Matches | Wickets | Economy Rate | Period |
|---|---|---|---|---|---|
| Rashid Khan | Afghanistan | 72+ | 121+ | 6.17 | 2017-present |
| Sunil Narine | West Indies | 57 | 92 | 6.67 | 2012-2024 |
| Lasith Malinga | Sri Lanka | 84 | 107 | 7.04 | 2006-2019 |
| Jasprit Bumrah | India | 60+ | 80+ | 6.23 | 2016-present |
| Imran Tahir | South Africa | 38 | 63 | 6.25 | 2011-2019 |
| Shakib Al Hasan | Bangladesh | 100+ | 130+ | 7.07 | 2007-present |
| Adil Rashid | England | 80+ | 100+ | 7.23 | 2012-present |
What is a good economy rate in cricket?
Economy rate standards differ sharply by format. In Tests, a good economy is under 3.0 runs per over. In ODIs, under 5.0 is excellent and under 6.0 is good. In T20Is, the global average is around 8.2-8.5, so any economy rate under 7.5 is considered very good and under 7.0 is exceptional. Under 6.0 in T20 cricket is world-class territory.
How do you calculate bowling economy rate?
Economy rate = Total Runs Conceded divided by Total Overs Bowled. Convert partial overs to decimals (balls divided by 6). For example, if a bowler concedes 36 runs in 4 overs, the economy rate is 36/4 = 9.0 runs per over. Always include wides and no-balls in the runs conceded total.
Does economy rate include wides and no-balls?
Yes, wides and no-balls are included in the runs conceded total for economy rate calculations under ICC scoring standards. However, no-ball and wide deliveries do not count as legal deliveries, so they are not included in the balls bowled count when converting to overs. This means a bowler who bowls many extras will have a worse economy rate without those extras affecting their over count.
What is a good economy rate in T20 cricket?
In T20 international cricket, the global average economy rate has climbed to approximately 8.2-8.5 as batting techniques have evolved. An economy rate below 7.5 is excellent, below 7.0 is world-class, and below 6.5 (Rashid Khan's territory) is historically exceptional. Death bowlers at top-tier T20 leagues typically target an economy rate below 9.0 as a success benchmark.
Who has the best bowling economy rate in T20 cricket?
Rashid Khan of Afghanistan consistently leads all active T20 cricketers with a career T20I economy rate of approximately 6.17-6.41 across his career. Among historical figures, slow-medium bowlers in T20's early era (2005-2010) posted lower rates due to less aggressive batting, but Rashid's sustained excellence against modern power hitting makes his rate the most impressive in context.
Is economy rate more important than wickets in T20?
In T20 cricket, many analysts argue that economy rate is slightly more important than wickets because runs saved directly translate to match outcomes, while wickets are more match-situation dependent. However, the ideal is a bowler who combines low economy with regular wickets — the combination multiplies value exponentially because wickets end partnerships while economy prevents boundary accumulation.
How does pitch condition affect economy rate?
Pitch conditions significantly affect economy rate. Spin-friendly dusty pitches in the subcontinent can reduce economy rates by 1.5-2.0 runs per over compared to flat batting pitches. Seam-friendly, bouncy pitches in Australia or South Africa can swing rates in either direction depending on whether the bowler can exploit movement. Contextual comparison requires using ground-specific and condition-specific benchmarks.
Pro Tip
Always evaluate economy rate in conjunction with the Dot Ball Percentage (DBP) — the proportion of deliveries that are dot balls (no runs scored). An economy rate of 8.0 with a 35% DBP profile is more threatening than one with a 25% DBP, because it suggests the bowler creates pressure through irregular boundary concession rather than steady singles.
Did you know?
The lowest single-match bowling economy rate in T20 international cricket history is 0.00 — achieved only when a bowler bowls a complete set of maidens, which has happened a handful of times in T20 history on extremely difficult pitches. By contrast, the highest single-match economy recorded in an international T20 is 36.00 (6 sixes off one over), famously achieved by Stuart Broad against Yuvraj Singh at the 2007 World T20.