Ako vypočítať Weld Strength
Čo je Weld Strength?
Weld strength depends on metal, electrode, process, and joint design. Proper sizing ensures weld is stronger than base metal.
Vzorec
Calculate fillet weld capacity: P = 0.707×t×L×F_y (simplified)
- P
- 0 — 0
- L
- L value — Variable used in the calculation
Sprievodca krok za krokom
- 1Calculate fillet weld capacity: P = 0.707×t×L×F_y (simplified)
- 2Butt weld strength equals base metal if properly made
- 3Account for loading direction and stress concentration
Worked Examples
Vstup
Fillet weld size t=6mm, length L=100mm, steel Fy=250 MPa
Výsledok
P ≈ 106 kN capacity
Simplified allowable stress
Common Mistakes to Avoid
- ✕Using leg size instead of throat dimension
- ✕Over-sizing welds (unnecessary cost and distortion)
Frequently Asked Questions
Why is fillet weld size measured at 0.707t instead of full size?
Throat dimension (0.707× size) is the critical failure plane; leg dimension is measured size.
How does loading direction affect weld strength?
Welds strongest in shear along the weld axis; weakest perpendicular to axis.
Ste pripravení počítať? Vyskúšajte bezplatnú kalkulačku Weld Strength
Vyskúšajte sami →