Kako izračunati Screw Thread Converter
Što je Screw Thread Converter?
Screw thread converters translate between different thread designations: UNC, UNF, metric (M), BSW, etc.
Formula
Inch: #10-24 UNC = 10 size, 24 threads/inch
- UNC
- 10 size — 10 size
Vodič korak po korak
- 1Metric: M10 = 10 mm diameter, coarse (1.5 mm pitch) or fine (1.25 mm)
- 2Inch: #10-24 UNC = 10 size, 24 threads/inch
- 3Non-interchangeable between systems (need washers, adapters)
Worked Examples
Unos
M8 metric thread
Rezultat
8 mm diameter, UNC equivalent #5-40, similar size
Not exactly interchangeable
Common Mistakes to Avoid
- ✕Assuming metric and inch are compatible (they're not)
- ✕Not checking thread pitch (critical for alignment)
Frequently Asked Questions
Can metric and inch threads be used interchangeably?
No, slightly different pitch and angle. Using wrong thread can damage equipment.
What's the difference between coarse and fine pitch?
Fine pitch holds tighter, suits thin walls, vibration-resistant. Coarse easier to assemble, stronger.
Spremni za izračun? Isprobajte besplatni Screw Thread Converter kalkulator
Probajte sami →